Quantum Baitcaster Set #1 Carbon Drag Kit

Product Description

Fits: Accurist 100HPTA BX2, 100SPTA BX2, ATS100HPT BX2, Energy 100SPTBX2, 100HPTBX2, ES150PT 150SPT, EXO Ex100HPT, 100HPTA, 100PPT, 100SPT, 100SPTA, Reax RX150HPT, 150SPT, Smoke 100PT, 100XPT, 100SPT, 100PPT, 150HPT, 150PPT, 150SPT, SHD200HPT, 200PPT, Tour TKVD150HPTA, TKVDC50 PPTA, TKVD150SPTA, Vapor 100HPT BX3.

The Elite Low-Profile Upgrade: Smoothdrag Carbontex Drag Kit (Quantum Set #1)

The Smoothdrag Quantum Baitcaster Set #1 is the precision performance kit for Quantum’s modern "Performance Tuned" (PT) and "Skeletal" baitcasting eras. This kit covers the high-performance EXO series, the legendary Smoke lineup, and the Vapor BX3. These reels are engineered with lightweight alloys and high-speed gearing, but the factory drag washers can develop stiction (initial jerkiness) or become "grabby" under the high-impact stress of heavy hooksets and braided line.

Upgrading to high-density, cross-weave Carbontex provides zero start-up inertia. This is the single most effective way to "super-tune" your Quantum, ensuring that when a trophy Bass or Redfish surges, the drag engages instantly and stays perfectly linear to protect your knots and light fluorocarbon leaders.

Why Upgrade Your Modern Quantum Baitcaster?

• Eliminate "Stick-Slip": High-performance baitcasters like the EXO and Smoke rely on precision. Carbontex removes the jerky hesitation common in seasoned factory stacks, providing a buttery smooth release from the moment the fish bolts.

• Superior Heat Management: Even in a low-profile frame, a long run generates significant friction heat. Carbon fiber handles these temperatures far better than standard composites, preventing drag "fade" mid-fight.

• Modern Braid Resilience: These reels are often spooled with 30lb–50lb braid. Carbontex provides the consistent, non-compressible surface required to maintain high lockdown pressure without the "mushy" feel.

• Permanent Performance: Carbontex is virtually wear-proof. Unlike original washers that can compress or become "mushy" with age, this is a "one-and-done" upgrade for the life of the reel.

Comprehensive Fitment & Compatibility

This kit is precision-lapped to fit the internal main gear stacks of Quantum’s premier 100, 150, and 200-sized baitcasting platforms.

Technical Note: This kit is designed for the main gear stack. Because these reels utilize high-speed brass or specialized PT alloy gears, ensure your stainless steel drive washers are mirror-smooth. If they show any signs of "pitting" or black oxidation, polish them with 0000 grade steel wool to ensure the new Carbontex performs at its peak.

Professional Installation & Lubrication Protocol

For high-end baitcasting reels, a "wet drag" setup is the professional standard for maximum smoothness and gear protection:

1. Cal’s Universal Drag Grease: Apply an ultra-thin, translucent coating of Cal’s Grease (Tan for standard, Purple for cold weather/finesse) to both sides of each Carbontex washer. This specialized PTFE grease prevents "chatter" and creates a waterproof seal.

2. Metal Washer Restoration: Polish your original stainless steel drive washers (the metal ones between the carbon) until they have a mirror finish. This is the "secret sauce" for a perfectly smooth star drag.

3. Spool Bearing Maintenance: While the side plate is open, apply a single drop of Deuthlon High-Speed Reel Oil to the spool bearings. This will significantly improve your casting distance and reduce backlashes.

4. Main Gear Lube: Apply a fresh coating of Deuthlon Reel Grease to the main gear teeth to maintain that signature "solid" Quantum feel during the retrieve.

SEO & Technical Summary

• Product Type: Premium Carbon Fiber Drag Washer Upgrade

• Brand: Smoothdrag (Carbontex)

• Kit ID: Quantum Baitcaster Set #1

• Application: Low-Profile Baitcasting / Bass / Inshore / Finesse

• Key Benefits: Zero-stiction start-up, high heat tolerance, and extreme longevity.