1/4" X 1/2" X 3/16" Ceramic Hybrid Bearing

Custom spec'd by us, these SR188ZC Ceramic Hybrid, ABEC 7 quality bearings are just the ticket to smoothen out whatever you install them into! Open on one side to facilitate easier cleaning. These...

1/8" x 3/8" x 5/32" Stainless Bearing

1/8" ID x 3/8" OD x 5/32" W Stainless Steel bearing, sheilded one side to facilitate easier cleaning Can substitute for Penn 26-13H (need to use your original bearing cup)

3 X 8 X 4mm Ceramic Hybrid Bearing

3x8x4mm Ceramic Hybrid Bearing, open one side for easier cleaning.

3/16" 1/2" X 13/64" Ceramic Hybrid Bearing

Custom spec'd by us, these SR3ZC Ceramic Hybrid, ABEC 7 quality bearings are just the ticket to smoothen out whatever you install them into! Open on one side to facilitate easier cleaning.

3X6X2.5mm CERAMIC BEARING

3x6x2.5mm Ceramic Hybrid bearing. This bearing is a direct replacement for these known part numbers as well as others not listed here: Daiwa E34-2401 Daiwa G28-1601

4 X 7 X 2.5mm Ceramic Hybrid Bearing

4 x 7 x 2.5mm Ceramic Hybrid Bearing, open one side for easier cleaning.

4 X 7 X 2.5mm Stainless Bearing

4 x 7 x 2.5mm Stainless Steel Bearing, open one side for easier cleaning. ABEC 7

4X11X4 CERAMIC BEARING

4 X 11 X 4mm ceramic hybrid bearing

5 X 11 X 4mm Ceramic Hybrid Bearing

5x11x4mm Ceramic Hybrid Bearing, open one side for easier cleaning. Very common size on casting reels that have a bearing under the drive pin.

7000 Hi-Speed (spool only)

*** Silver high speed spool for the 7000 ***

7000C and 7500's Carbon Drag Kit

Set of 4 Carbon Fiber washersReplace Abu part #'s 975169(kit),6950, 6951, 6952 **DOES NOT FIT NEWER 'i' MODEL REELS.

7904013201 TRION CLUTCH BEARING AKA 1145119

CLutch bearing for Pflueger Trion series fly reels. This bearing has been discontinued but we have a good supply of them.Fits the following (and possibly others)Trion 1912Trion 1934Trion 1956Trion...