Islander

Islander Steelheader Ceramic Bearing Set 1/4 x 3/8 x 1/8

Stainless Steel/Ceramic Hybrid ABEC 7 quality Bearings for Islander Steelheader centerpin reels. Orange seal shields on both sides of bearing. Kit contains 2 bearings. Please note: your existing reel bearings may be held in place by LocTite locking...

Islander Pacific Steelheader Ceramic Bearing Set - Older models 3/16 x 1/2 x .196

Ceramic Hybrid ABEC7 bearing set for Islanders' older series Steelheader reel. How to tell if you have a newer or older Steelheader: Older models had an aluminum cap covering the outer bearing and were called 'Pacific Steelheader', newer models just have...

ISLANDER MR3 BEARING, FULL CERAMIC 15 x 21 x 4

Full ceramic bearing will never rust! Smooth and quiet, these are the *Ultimate* bearing. Can be used in saltwater with no damage to the bearing from corrosion. This is the clutch bearing in MR3's under the drag plate and in the back of the spool...

ISLANDER MR2 & MR3 OUTER BEARING, FULL CERAMIC 3/8 x 7/8

Full ceramic bearing will never rust! Smooth and quiet, these are the *Ultimate* bearing. Can be used in saltwater with no damage to the bearing from corrosion. This is the outer-most bearing in MR2's and MR3's under the drag knob. Measures 3/8" inner...

ISLANDER FULL CERAMIC BACK OF SPOOL BEARING

MR2 back of spool bearing. Full ceramic will NEVER RUST!  

3/8 X 5/8 ABEC 7 CERAMIC BEARING

ABEC 7 3/8 X 5/8 CERAMIC BEARINGS WITH NEW ORANGE SEALS  

Ceramic Bearing 17265c

Fit the MR3, and Hardy Ultralight 10000 dd. Replaces part numbers ABU1145120, and ABU 7904013301.