STH

STH CASSETTES

STH Cassettes | Replacement Polycarbonate Fly Reel Spools Part Name: STH Cassettes (Available in Sizes 1.5, 2, & 4) Part Type: Spare/Replacement Fly Reel Spool System Material: High-Impact...

DRAG DISK WITH GEAR

STH drag disk with center gear attached. This will fit most STH reels using this type of drag setup.  

WORM & SCREW

WORM AND SCREW TO FIT MOST STH FLY REELS.

DRAG KNOB

DRAG KNOB TO FIT MOST STH FLY REELS. THIS KNOB REQUIRES THE WORM AND SCREW.

SLT Drag Disc w/cork, Outer

Drag dis for STH Salt (SLT) series fly reels.  Disk is about 1.25" across and has a 3/8" hole. The FOUR posts engage into the body, at the drag knob.

MEDALLION

The STH Medallion is an essential accessory designed specifically for STH fly reels, seamlessly combining functionality with style. Crafted with precision, this button measures approximately 14.5mm...

CASSETTE REEL FOOT

STH, CORTLAND CASSETTE REEL FOOT WITH OFF SET SCREW HOLES. The base of the foot sides have a slight flare

Teflon Drag Washer 7/8"

STH Salt Series (SLT) teflon washer. Measures about 7/8" across with a 3/8" hole and just over 1/8" thick.

Teflon Drag Washer 3/8" - NLA

STH Salt Series (SLT) teflon drag washer. Measures about 3/4" across with a 3/8" hole. ***NO LONGER AVAILABLE***

Teflon Drag Washer

STH Salt Series (SLT) teflon drag washer. Measures about 1.25" across with a 3/8" hole.

SLT Drag Disc w/cork, Inner

Drag dis for STH Salt (SLT) series fly reels.  Disk is about 1.25" across and has a 3/8" hole. The two posts engage into the clutch disc.

Stop Pin

This is the standard stop pin used in most STH fly reels.TO install, you'll need to remove the old pin assembly. To do so, there is *usually* a hole (sometimes covered up with paint) under the latch...