Okuma Set #12 Carbon Drag Kit

Product Description

Fits: Acuador FS15, Alaris ALS 20, Alumina AL 15 20, Aria 20a 20aCL, Avenger ABF 1000 20A 20B 3000 500, Avenger AV 10b 15, Avenger 1000CL 100LEa 1000A, Aveon AE 15 20, Azaki 20, Californian TC 10b 15a 20a, Californian TCP 20a, Ceymar CBF 1000 500, Ceymar C 10 10WH 10CL 20, Ceymar CXT 10, Ceymar CHD 1000A, CS 10CL, Epixor EPL 20, Epixor EF 15 15a 20a, Epixor EPXT 20, Fuel FSP 1000, Granite GR 15, Halogen HG 15, Ignite IT 10a 20, Inspira IA 15 20, Inspira ISX 20B 20B-CL 20R 20W 20W-CL, Inspira IS 15, Metaloid MD 16, Safina SPa-10, Scorpio SP SPa-10, Stinson Si20, Stratus SGT 15, Stratus SV 10CL, Trio LE 20, Tundra TBF 20A, V System V 15 20.

Finesse Performance Redefined: Smoothdrag Carbontex Drag Kit (Okuma Set #12)

The Smoothdrag Okuma Set #12 is the ultimate precision upgrade for the "light-tackle specialists" of the Okuma spinning world. Covering the 500, 1000, 10, 15, and 20 frame sizes, this kit is designed for reels where 4lb to 10lb test line is the norm. In these finesse scenarios, the "stiction" (stick-slip) of a factory felt washer isn't just a nuisance—it’s the primary cause of snapped leaders when a trophy trout or panfish decides to play "drama queen" at boat-side.

By replacing the factory felt with high-density, cross-weave Carbontex, you eliminate that jerky hesitation. The result is a drag that engages instantly and smoothly, protecting your knots and thin-diameter lines during the most delicate fights.

Why Upgrade Your Small-Frame Okuma?

• Eliminate Light-Line "Shock": Ultralight fishing relies on the drag moving the millisecond a fish bolts. Carbontex provides zero start-up inertia, ensuring your 2lb or 4lb test fluorocarbon doesn't pop on the strike.

• Consistency in the Cold: Many of these reels (like the Ceymar and Inspira) are favorites for ice fishing or early spring trout. Unlike felt which can hold moisture and freeze, Carbontex remains perfectly consistent in sub-zero temperatures.

• Superior Longevity: Small felt washers wear out and compress quickly. Carbontex is virtually wear-proof and won't rot, making it a permanent "set-and-forget" upgrade for your favorite finesse reel.

• Precision Low-End Control: Gain granular control at the bottom end of the drag range, allowing for micro-adjustments that actually translate to predictable pressure changes.

Comprehensive Fitment & Compatibility

This kit is precision-lapped to fit the internal drag stacks of Okuma’s 500 to 2000-sized spinning reels.

Technical Note: Depending on the specific model and production year, these small spools may utilize a single-washer or a 3-washer stack. Ensure you keep the small metal "ear" washers in their original order. You can find high-resolution, exploded-view PDF schematics at www.reelschematic.com for precise assembly.

Professional Installation & Lubrication Protocol

For ultralight and light-tackle reels, a "wet drag" setup is the professional standard for achieving that signature "buttery" feel:

1. Cal’s Universal Drag Grease: Apply an ultra-thin, almost translucent coating of Cal’s Grease (Purple is highly recommended for cold weather/finesse) to both sides of each Carbontex washer. Too much grease can make a light drag feel "sluggish," so a micro-thin layer is best.

2. Metal Washer Polishing: Check your stainless steel drive washers for any signs of "glassy" buildup or light oxidation. Polish them with 0000 grade steel wool to a mirror finish. This ensures 100% surface contact with your new carbon.

3. Spool Bearing Care: While the spool is off, apply a single drop of Deuthlon High-Speed Reel Oil to the spool shaft and any accessible bearings to maximize the reel's smooth rotation.

SEO & Technical Summary

• Product Type: Premium Carbon Fiber Drag Washer Upgrade

• Brand: Smoothdrag (Carbontex)

• Kit ID: Okuma Set #12

• Application: Ultralight / Finesse Spinning / Ice Fishing / Light Inshore

• Key Benefits: Zero-stiction start-up, moisture/freeze resistance, and extreme longevity.