Product Description

DAM Quick 110-458 Line Guide Cap - SLS 2

Protect your line roller assembly with this genuine DAM Quick Line Guide Cap.

The line guide cap (often referred to as the roller dust cover or line roller washer cap) is a small but essential component of your spinning reel's bail assembly. Designed specifically for the DAM Quick SLS 2, this part fits over the side of the line roller, shielding the internal bushing and shaft from sand, salt, and water intrusion. Additionally, it ensures the line roller is properly spaced and aligned for smooth rotation. If this cap is cracked or missing, debris can seize the roller, leading to line twist and damage.

Product Features

• Protective Shield: Seals the delicate internals of the line roller mechanism against environmental contaminants.

• Proper Spacing: Ensures the line roller sits correctly on the bail arm for optimal line alignment.

• Exact Fit: Molded specifically for the bail geometry of the DAM Quick SLS 2.

• Durable Material: Made to withstand exposure to UV rays and marine environments without becoming brittle.

Model Compatibility

This part is verified to fit the following DAM Quick spinning reel models:

• DAM Quick SLS 2

Note: This cap is specific to the SLS 2. It is not compatible with the smaller SLS 0/1 or the larger SLS 3/4/5 models.

Part Specifications

• Part Number: 110-458

• Alternate Part Number: 110458

• Part Description: Line Guide Cap / Roller Cap / Dust Cover

Schematic Reference

To confirm the assembly order and correct orientation of this cap, please consult the service diagrams.

• View the specific schematic for your reel at www.reelschematic.com

Installation Notes

This cap usually sits on the outside of the line roller, held in place by the bail screw.

1. Remove the main bail screw carefully.

2. Inspect the internal line roller bushing/bearing for cleanliness while exposed.

3. Place the new 110-458 cap over the roller assembly.

4. Reinsert and tighten the bail screw. Ensure the cap is seated flush and does not rub against the rotating roller, which would hinder performance.