Product Description
3 Carbontex, 3 metal.
Finesse Perfection: Smoothdrag Carbontex Drag Kit for Daiwa Pixy & Presso
In the world of Bait Finesse System (BFS) and ultralight trout fishing, your drag isn't just a brake—it’s a life-support system for your 2lb to 6lb test line. The Smoothdrag Pixy/Presso Kit is the ultimate "super-tune" for these specialized finesse machines.
Unlike standard kits, this 3 Carbontex / 3 Metal configuration provides a complete overhaul of the drag stack. By replacing the factory metal washers with precision-ground plates and adding high-density Carbontex, you eliminate the "stiction" (stick-slip) that snaps light fluorocarbon on the initial strike.
Why the "3+3" Kit is Essential for Finesse
-
Zero Start-Up Inertia: When a trout or smallmouth bolts on 4lb test, the spool must turn instantly. This kit ensures there is no jerky hesitation, protecting your knots and thin-diameter lines.
-
Precision-Ground Metal Washers: Factory-stamped metal washers are rarely perfectly flat. This kit includes 3 lapped metal washers that provide 100% surface contact with the carbon, ensuring a perfectly linear drag curve.
-
Micro-Adjustable Control: Finesse fishing requires granular control. This kit allows you to make tiny adjustments to your drag star that actually translate to smooth, predictable changes in pressure.
-
Ultra-Smooth Low-End: Specifically tuned to perform at the bottom end of the drag range (under 2 lbs of pressure), where factory drags often become "gritty" or inconsistent.
Comprehensive Fitment & Compatibility
This kit is designed specifically for Daiwa’s small-frame, high-precision finesse baitcasters.
| Series | Compatible Models |
| Liberto Pixy | Amber Orange, Airy Red, Silver Mickey, Yellow Pearl |
| Pixy 68 | PX68, PX68L, PX68 SPR (Small Plug Revolution) |
| Presso | Daiwa Presso Baitcaster (Silver/Orange finesse model) |
| Alphas | Often fits Alphas 103/105 finesse variants (verify stack height) |
Technical Note: Because these reels are built with "jewelry-grade" tolerances, the installation of the metal washers must be done with care to ensure they are seated perfectly within the main gear. You can find high-resolution, exploded-view PDF schematics for these models at www.reelschematic.com.
Professional Installation & Lubrication Protocol
For ultralight finesse applications, the lubrication choice is critical to maintain the "light" feel of the reel:
-
Deuthlon Reel Grease (Finesse): Apply a micro-thin, almost invisible coating of Deuthlon Reel Grease (or Cal’s Purple for cold weather) to both sides of each Carbontex washer. In finesse fishing, "less is more"—too much grease can make a light drag feel "sluggish."
-
Metal Washer Handling: Avoid touching the flat surfaces of the new metal washers with bare fingers after cleaning; skin oils can affect the friction coefficient. Use tweezers or clean gloves for the final assembly.
-
Spool Bearing Maintenance: Finesse reels live and die by their spool speed. While the side plate is off, apply a single drop of Deuthlon High-Speed Reel Oil to the spool bearings to maximize your ability to cast 1/16 oz lures.
SEO & Technical Specifications
-
Product Type: Full Drag Stack Upgrade (3 Carbon / 3 Metal)
-
Brand: Smoothdrag (Carbontex)
-
Application: BFS (Bait Finesse System) / Ultralight Freshwater
-
Key Benefits: Zero start-up inertia, precision-ground flatness, and light-line protection.
