Okuma Set #2 Carbon Drag Kit

Product Description

Fits: Big Lake BLT-30D 30DX, Clarion CLR 303L 453L 453LS, Coldwater CW 303D 303DS 303DLX 453D 453DS, Convector CV 30C 30D 30DS 30L 45C 45D, 45L, Cortez 10CSa 12CSa.

Trolling Dominance: Smoothdrag Carbontex Drag Kit (Okuma Set #2)

The Smoothdrag Okuma Set #2 is a specialized performance upgrade for mid-to-large frame trolling and star drag reels. These models—specifically the Coldwater, Convector, and Clarion—are the workhorses of the Great Lakes and coastal fisheries. Whether you are pulling massive dipsy divers for Salmon or fly-lining baits for nearshore pelagics, the factory drag washers can develop "stiction" (stick-slip) under the constant tension of a trolling spread.

Upgrading to high-density, cross-weave Carbontex eliminates that jerky, uneven release. This kit provides zero start-up inertia, ensuring that when a fish strikes at 3 knots, the drag engages instantly and smoothly, protecting your knots and thin-diameter braided lines.

Why Upgrade Your Okuma Star Drag or Troller?

• Eliminate "Shock-Snaps": Trolling reels face high initial impact when a fish hits a moving bait. Carbontex removes the split-second "catch" common in factory stacks, preventing break-offs on the strike.

• Extreme Heat Dissipation: Fighting heavy fish in deep water generates intense friction. Carbon fiber handles these temperatures far better than factory fiber or felt, preventing drag "fade" or glazing during long runs.

• All-Weather Consistency: These reels live in damp, cold, and salty environments. Carbontex is virtually impervious to moisture and won't rot or become "mushy," maintaining a consistent feel trip after trip.

• Precision Control: Maintain a perfectly linear drag curve, allowing for micro-adjustments to the star drag that actually translate to predictable pressure changes.

Comprehensive Fitment & Compatibility

This kit is precision-lapped to fit the internal gear stacks of Okuma’s 30 and 45-sized trolling and high-speed star drag platforms.

Technical Note: These reels typically utilize a 3-washer or 5-washer stack depending on the specific model and production year. Because these reels are designed for heavy-duty "winching," ensure your metal drive washers are perfectly flat. You can verify your stack sequence by referencing high-resolution schematics at www.reelschematic.com.

Professional Installation & Lubrication Protocol

For trolling and high-speed star drag reels, a "wet drag" setup is the gold standard for maximum smoothness and internal protection:

1. Cal’s Universal Drag Grease: Apply an ultra-thin, translucent coating of Cal’s Grease (Tan) to both sides of each Carbontex washer. This specialized PTFE grease prevents "chatter" and creates a waterproof seal for your metal drive washers.

2. Metal Washer Restoration: Check your stainless steel drive washers (the metal plates between the carbon). Because trolling reels see high torque, look for any signs of "bluing" from heat or salt scoring. Polish them with 0000 grade steel wool to a mirror finish.

3. Main Gear Care: While the side plate is open, apply a light coating of Deuthlon Reel Grease to the main brass drive gear to keep the retrieve effortless under the strain of heavy weights or lead core.

4. Anti-Reverse Check: Ensure the anti-reverse pawl or one-way bearing is clean. For the Cortez series, a single drop of Deuthlon Reel Oil on the bearing will keep the handle back-play at a minimum.

SEO & Technical Summary

• Product Type: Premium Carbon Fiber Drag Washer Upgrade

• Brand: Smoothdrag (Carbontex)

• Kit ID: Okuma Set #2

• Application: Mid-to-Large Trolling / Line Counter / High-Speed Star Drag

• Key Benefits: Zero-stiction start-up, high heat tolerance, and extreme longevity.