Okuma Set #15 Carbon Drag Kit

Product Description

Fits: Alumina AL 30 40, Avenger ABF 30 30CL, Aveon AE 30 40, Californian TBF 40A 40B, Cedros CJ 30 40S, Epixor EF 20 30 30a 40ab, Epixor EB 20 30, Epixor EFS 30, Halogen HG 20 30, Ignite iT 30 40, Inspira IA 30 40, Inspira IS 20 30, Metaloid MD 20 30, Metaloid MDS 30, Salt Striker SS 30B, Salt Striker SSFB 40B, Stratis SGT 20 30, Stinson Si 30 40, Trio LE 30 40, Trio BF 30 40, Tundra TBF 40A, V System V 30 40.

Saltwater-Ready Versatility: Smoothdrag Carbontex Drag Kit (Okuma Set #15)

The Smoothdrag Okuma Set #15 is perhaps the most versatile kit in the Okuma lineup, designed to fit the core "workhorse" sizes (20, 30, and 40) across nearly two dozen reel series. Whether you are using a light-tackle Inspira, a budget-friendly Avenger Baitfeeder, or the rugged Cedros CJ, the factory felt washers are often the first component to fail under the heat and pressure of a big fish.

By upgrading to high-density, cross-weave Carbontex, you replace the "grabby" nature of aged felt with zero start-up inertia. This ensures that even on light leaders, the drag engages instantly and stays perfectly linear throughout the fight.

Why Upgrade Your Okuma Spinning Reel?

• Eliminate "Felt-Fade": Most of these mid-range Okuma reels come with oiled felt washers. While smooth at first, felt compresses over time and can "stutter" during long runs. Carbontex never loses its shape or consistency.

• Higher Heat Tolerance: Even a mid-sized 30 or 40-sized reel can generate significant friction heat when a heavy fish runs. Carbon fiber dissipates this heat far better than felt, preventing the drag from "locking up."

• All-Weather Performance: For "Salt Striker" and "Cedros" users, Carbontex is essential. It is virtually impervious to moisture and salt, ensuring your drag feels the same in a heavy downpour as it does on a dry day.

• Refined Baitfeeder Transition: On models like the Avenger ABF and Coronado, the transition from the secondary baitfeeder drag to the main front drag is significantly smoother with Carbontex installed in the primary stack.

Comprehensive Fitment & Compatibility

This kit is precision-lapped to fit the internal drag stacks of Okuma’s 20, 30, and 40-sized spinning reels.

Technical Note: While this kit covers a massive range, always verify the number of washers in your specific spool. Most of these models utilize a 3-washer stack. To ensure your reassembly sequence is perfect, visit www.reelschematic.com for high-resolution exploded views.

Professional Installation & Lubrication Protocol

For mid-sized spinning reels, we strongly recommend a "wet drag" setup to maximize smoothness and longevity:

1. Cal’s Universal Drag Grease: Apply an ultra-thin, translucent coating of Cal’s Grease (Tan or Purple) to both sides of each Carbontex washer. This specialized PTFE grease prevents "chatter" and creates a waterproof seal for your stainless steel metal plates.

2. Metal Washer Polishing: Check your original stainless steel drive washers (the metal plates between the carbon). If they show any signs of salt-pitting or "glassy" buildup, polish them with 0000 grade steel wool to a mirror finish before installing the new Carbontex.

3. Hydro Block Check: Many of these reels (like the Trio and V System) feature a Hydro Block rubber seal on the drag knob. Ensure this seal is clean and lightly oiled to prevent water from entering the drag chamber.

SEO & Technical Summary

• Product Type: Premium Carbon Fiber Drag Washer Upgrade

• Brand: Smoothdrag (Carbontex)

• Kit ID: Okuma Set #15

• Application: Mid-Sized Spinning / Baitfeeder / Freshwater & Saltwater

• Key Benefits: High heat tolerance, zero-stiction start-up, and moisture resistance.