Product Description
Fits: Acuador FS 65 80, Avenger ABF 90, Avenger AV 65 80, Coronado CD 65 90, Niko FA 65 80.
Big Game Stopping Power: Smoothdrag Carbontex Drag Kit (Okuma Set #14)
The Okuma Set #14 is designed for the "heavy lifters" of the Okuma spinning world—the large-frame 65, 80, and 90-sized reels. Whether you are using a classic Coronado CD baitfeeder for shore-casting or an Avenger AV for offshore duty, the factory felt washers in these large spools are prone to "flattening" and "stuttering" under the high-pressure runs of sharks, rays, or large pelagics.
The Smoothdrag Carbontex Drag Kit is the ultimate performance upgrade. By replacing the original factory stack with high-density, cross-weave carbon fiber, you eliminate "stiction" and gain the buttery-smooth consistency required to land trophy-class fish on large-capacity spinning tackle.
Why Upgrade Your Large-Frame Okuma?
-
Eliminate "Stick-Slip": Large felt washers often "grab" before they slip, especially when set to high drag pressures. Carbontex provides zero start-up inertia, protecting your knots and preventing snapped leaders on the initial strike.
-
Extreme Heat Dissipation: In sizes 65–90, the surface area of the drag is massive. Carbon fiber handles the intense friction heat of a long-distance run far better than felt, preventing the drag from "fading" or locking up mid-fight.
-
Corrosion & Moisture Resilience: These reels are built for the surf and the salt. Carbontex is virtually impervious to moisture and won't rot or become "mushy" like factory felt, ensuring your settings remain identical even in a heavy downpour.
-
Precision Control: Maintain a perfectly linear drag curve. This allows for micro-adjustments to the drag knob that actually translate to predictable changes in pressure, giving you total confidence near structure.
Comprehensive Fitment & Compatibility
This kit is precision-lapped to fit the internal gear stacks of Okuma’s high-capacity saltwater and baitfeeder series.
| Series | Compatible Models |
| Baitfeeder (Live Liner) | Avenger ABF 90, Coronado CD 65, Coronado CD 90 |
| Saltwater Spinning | Avenger AV 65, Avenger AV 80 |
| Acuador & Niko | Acuador FS 65, Acuador FS 80, Niko FA 65, Niko FA 80 |
Technical Note on Baitfeeders: Models like the Avenger ABF 90 and Coronado CD feature a dual drag system. This Smoothdrag kit is designed to upgrade the primary front drag stack (located under the drag knob), which handles the heavy lifting once the fish is hooked and the main gears are engaged.
Professional Installation & Lubrication Protocol
For large-frame saltwater reels, we strongly recommend a "wet drag" setup to maximize smoothness and provide a waterproof barrier:
-
Cal’s Universal Drag Grease: Apply an ultra-thin, translucent coating of Cal’s Grease (Tan or Purple) to both sides of each Carbontex washer. This specialized PTFE grease prevents "chatter" and ensures the drag remains consistent even after a saltwater drenching.
-
Metal Washer Restoration: Check your stainless steel drive washers (the metal plates between the carbon). Because these reels generate high torque, check for any signs of "bluing" from heat or salt pitting. Polish them with 0000 grade steel wool to a mirror finish before installing the new Carbontex.
-
Hydro Block Maintenance: When reassembling the spool, ensure the Hydro Block rubber seal on the drag knob is clean and lightly oiled. This seal is the first line of defense in keeping salt and sand out of your new Carbontex stack.
SEO & Technical Summary
-
Product Type: Premium Carbon Fiber Drag Washer Upgrade
-
Brand: Smoothdrag (Carbontex)
-
Kit ID: Okuma Set #14 (Large Spinning)
-
Application: Surf Casting / Heavy Saltwater / Baitfeeder
-
Key Benefits: High heat tolerance, zero-stiction start-up, and extreme longevity.
