Okuma Set #1 Carbon Drag Kit

Product Description

Fits: Clarion CLR 203L 204D, Coldwater CW 153D 153DX 203D 203D-LE 203DLX-LE 203DX, Convector CV 15C 15D 15L 20C 20D 20L, Depth Master DMM-20, Mag ALC 20CS.

Precision Trolling: Smoothdrag Carbontex Drag Kit (Okuma Set #1)

The Smoothdrag Okuma Set #1 is the essential performance upgrade for Okuma’s smaller-frame trolling and line counter reels. These reels—specifically the 15 and 20 sizes—are the "technical" workhorses for Walleye, Kokanee, and light-tackle Salmon anglers. In these fisheries, where 10lb to 15lb leaders are common, the "stiction" (stick-slip) of a factory washer is the primary cause of snapped lines on the initial strike.

Upgrading to high-density, cross-weave Carbontex provides zero start-up inertia. This ensures that the moment a fish hits your trolling spread at speed, the drag engages instantly and smoothly, protecting your knots and preventing pulled hooks.

Why Upgrade Your Small-Frame Okuma Troller?

• Eliminate "Shock-Snaps": Trolling reels face high impact when a fish hits a moving bait (especially with lead core or copper). Carbontex removes the jerky hesitation common in factory stacks, allowing for a perfectly smooth transition from "clicker" to "fight."

• Superior Heat Management: Even a smaller 15 or 20-sized reel generates significant friction heat during long runs. Carbon fiber handles these temperatures far better than factory fiber, preventing drag "fade" or glazing mid-fight.

• All-Weather Consistency: These reels live in damp, cold environments. Carbontex is virtually impervious to moisture and won't rot or become "mushy," maintaining a consistent feel even in freezing temperatures or heavy rain.

• Refined Control: Experience more granular, micro-adjustable pressure across the star drag range, giving you total confidence when fishing near structure or other lines.

Comprehensive Fitment & Compatibility

This kit is precision-lapped to fit the internal gear stacks of Okuma’s 15 and 20-sized trolling and star drag platforms.

Technical Note: These reels typically utilize a 3-washer stack. Because these reels are often used for precision trolling, the flatness of your stainless steel drive washers is critical. You can verify your stack sequence by referencing high-resolution schematics at www.reelschematic.com.

Professional Installation & Lubrication Protocol

For trolling reels, a "wet drag" setup is the professional standard for maximum smoothness and internal protection:

1. Cal’s Universal Drag Grease: Apply an ultra-thin, translucent coating of Cal’s Grease (Tan) to both sides of each Carbontex washer. This specialized PTFE grease prevents "chatter" and creates a waterproof seal for your metal drive washers.

2. Metal Washer Restoration: Check your stainless steel drive washers (the metal plates between the carbon). Because trolling reels see high torque, look for any signs of "bluing" from heat or scoring. Polish them with 0000 grade steel wool to a mirror finish.

3. Main Gear Care: While the side plate is open, apply a light coating of Deuthlon Reel Grease to the main brass drive gear to keep the retrieve effortless under the strain of heavy weights or lead core.

4. Levelwind Maintenance: Line counter reels rely on a perfectly timed levelwind. Ensure the worm gear is clean and lightly oiled with Deuthlon Reel Oil to maintain smooth line lay during heavy runs.

SEO & Technical Summary

• Product Type: Premium Carbon Fiber Drag Washer Upgrade

• Brand: Smoothdrag (Carbontex)

• Kit ID: Okuma Set #1

• Application: Small-Frame Trolling / Line Counter / Kokanee & Walleye

• Key Benefits: Zero-stiction start-up, high heat tolerance, and extreme longevity.