Product Description
Fits: Medalist 7050 7060 President XT6750 XT6760.
The Heavy-Duty Spinning Restoration: Smoothdrag Carbontex Drag Kit (#1206635)
The Pflueger Medalist (7050, 7060) and President XT (6750, 6760) are the larger-frame "tanks" of the Pflueger spinning lineup. Built with aluminum bodies and high-capacity spools, these reels are favorites for heavy freshwater (Salmon/Steelhead) and inshore saltwater applications. However, the factory drag washers in these larger models can become compressed or "grabby" over time, leading to stiction (stick-slip) that can snap leaders when a heavy fish surges.
The Smoothdrag #1206635 Carbontex Kit is the essential performance upgrade. By replacing the original factory stack with high-density, cross-weave carbon fiber, you achieve zero start-up inertia. This ensures that the moment a trophy fish bolts, the drag engages instantly and stays perfectly smooth, protecting your knots and modern braided lines.
Why Upgrade Your Medalist or President XT?
-
Eliminate "Shock-Snaps": Large-frame reels generate significant impact when a heavy fish strikes. Carbontex removes the jerky hesitation common in aged factory stacks, providing a perfectly linear drag curve.
-
Superior Heat Management: Fighting heavy gamefish on 50 and 60-sized reels generates intense internal friction heat. Carbon fiber handles these temperatures far better than standard composites, preventing drag "fade" or glazing mid-fight.
-
Modern Braid Ready: These reels are often spooled with 20lb–40lb braid. Carbontex provides the consistent, non-compressible surface required to handle the high-impact tension of zero-stretch braided lines.
-
Permanent Performance: Carbontex is virtually wear-proof and won't rot or become "mushy" with age, making it a "set-and-forget" upgrade for the life of the reel.
Comprehensive Fitment & Compatibility
This kit is precision-lapped to fit the internal spool stacks of Pflueger’s heavy-duty spinning platforms.
| Series | Compatible Models | Frame Sizes |
| Pflueger Medalist | 7050, 7060 | 50, 60 |
| Pflueger President XT | 6750, 6760 | 50, 60 |
Technical Note: These 50 and 60-sized reels typically utilize a multi-washer stack to handle higher drag pressures. Because these reels are often used in demanding environments, ensure your stainless steel drive washers are mirror-smooth. If they show any signs of salt pitting or "glassy" buildup, polish them with 0000 grade steel wool to ensure the new Carbontex performs at its peak.
Professional Installation & Lubrication Protocol
For heavy-duty spinning reels, a "wet drag" setup is the professional standard for maximum smoothness and internal protection:
-
Cal’s Universal Drag Grease: Apply an ultra-thin, translucent coating of Cal’s Grease (Tan) to both sides of each Carbontex washer. This specialized PTFE grease prevents "chatter" and creates a waterproof seal.
-
Metal Washer Restoration: Polish your original stainless steel drive washers until they have a mirror finish. This ensures 100% surface contact with your new carbon fiber.
-
Spool Bearing Maintenance: While the spool is off, apply a single drop of Deuthlon High-Speed Reel Oil to the main shaft and the spool bearing to ensure the rotation remains silent and effortless.
-
Drag Knob Maintenance: Ensure the rubber gasket on the drag knob is clean and lightly oiled to keep dust and water out of your new precision drag stack.
SEO & Technical Summary
-
Product Type: Premium Carbon Fiber Drag Washer Upgrade
-
Brand: Smoothdrag (Carbontex)
-
Kit ID: Part #1206635
-
Application: Heavy Spinning / Salmon / Steelhead / Inshore Saltwater
-
Key Benefits: Zero-stiction start-up, high heat tolerance, and extreme longevity.
