Product Description

DAM Quick 110-462 Bail Arm - SLS 4

Maintain the smooth casting action and reliability of your DAM Quick reel with this genuine Bail Arm replacement.

The bail arm acts as the crucial hinge point for your reel's bail system, ensuring the bail wire opens fully for casting and locks securely for retrieval. Designed specifically for the larger chassis of the DAM Quick SLS 4, this component endures significant torque and environmental stress. A cracked or worn bail arm can lead to misalignment, causing line twist or bail failure. This authentic replacement part restores the original geometry and mechanical integrity of your reel's rotor assembly.

Product Features

• Precise Fitment: Engineered exclusively for the rotor specifications of the DAM Quick SLS 4.

• Tough Construction: Built from high-impact, corrosion-resistant material to withstand heavy use and marine elements.

• Restored Function: Eliminates slop and binding in the bail mechanism, ensuring a crisp, consistent flip.

• OEM Quality: Matches the original factory design for a seamless repair and professional appearance.

Model Compatibility

This part is verified to fit the following DAM Quick spinning reel models:

• DAM Quick SLS 4

Note: This bail arm is specific to the SLS 4 frame size. It is not interchangeable with the smaller SLS 2/3 or the larger SLS 5 models.

Part Specifications

• Part Number: 110-462

• Alternate Part Number: 110462

• Part Description: Bail Arm / Bail Mount / Rotor Arm

Schematic Reference

To confirm the correct mounting side (spring side vs. line roller side) and assembly sequence, please consult the service diagrams.

• View the specific schematic for your reel at www.reelschematic.com

Installation Notes

Replacing the bail arm is a standard maintenance task but requires care regarding internal springs.

1. Unscrew the retaining bolt or screw to release the old arm from the rotor.

2. Watch for the bail spring or trip lever connection; ensure they are not lost during disassembly.

3. Clean the rotor pivot post thoroughly to remove old grease and dirt.

4. Lightly grease the pivot area and the contact points of the new 110-462 arm.

5. Align the arm, re-engage the spring tension, and tighten the screw securely. Check that the arm moves freely before final tightening.