Product Description
DAM Quick 110-455 Line Guide - SLS 0 / 1 / 2
Safeguard your line and ensure smooth casting with this genuine DAM Quick Line Guide.
The line guide (commonly known as the line roller) is the critical interface between your fishing line and the reel during retrieval. Located on the bail arm, it must rotate freely to prevent line twist and provide a smooth surface to prevent abrasion. On the smaller DAM Quick SLS 0, 1, and 2 models, a worn or seized line guide can lead to frayed line, reduced casting distance, and eventual break-offs. This authentic replacement part restores the low-friction performance needed for light lines and finesse fishing.
Product Features
-
Polished Finish: Ultra-smooth surface minimizes friction, protecting delicate monofilament and braid from heat and abrasion.
-
Precise Fit: Engineered specifically for the bail assemblies of the compact SLS series (0, 1, and 2).
-
Hardened Material: Designed to resist grooving and wear caused by the constant pressure of the line.
-
Line Management: Essential for reducing line twist and ensuring even spooling on the retrieve.
Model Compatibility
This part is verified to fit the following DAM Quick spinning reel models:
-
DAM Quick SLS 0
-
DAM Quick SLS 1
-
DAM Quick SLS 2
Note: This part is sized for the smaller frame reels. It is not compatible with the larger SLS 3, 4, or 5 models.
Part Specifications
-
Part Number: 110-455
-
Alternate Part Number: 110455
-
Part Description: Line Guide / Line Roller
Schematic Reference
To confirm the correct assembly order of the roller, bushings, and washers, please consult the service diagrams.
-
View the specific schematic for your reel at www.reelschematic.com
Installation Notes
When installing the 110-455 line guide, cleanliness is key. Remove the bail screw and the old roller. Clean the shaft or bushing thoroughly. Apply a drop of lightweight reel oil (not heavy grease) to the new guide to ensure it spins freely. If the guide does not rotate, it will act as a stationary post, which causes severe line twist. Ensure the guide is oriented correctly to funnel the line into the center of the roller.
