Okuma Set #9 Low Profile Carbon Drag Kit

Product Description

Fits: Citrix Ci 354 354A LXA PA PLXA 364A LXA PLXA, Coldwater CW 354D DLX, Convector CV354D DLX, Komodo KDR 364 X P PLX.

The Powerhouse Upgrade: Smoothdrag Carbontex Drag Kit (Okuma Set #9) for 350/360 Low Profile Reels

The Okuma Citrix, Komodo, and Coldwater Low Profile series are the "muscle cars" of the baitcasting world. These reels are designed for high-torque applications—cranking massive double-10 bucktails for Musky, vertical jigging for Lake Trout, or battling hard-pulling inshore species.

While these reels are built with heavy-duty gears, the factory drag washers can sometimes struggle with "stiction" (stick-slip) under the intense pressure these reels generate. The Smoothdrag Okuma Set #9 replaces the factory stack with high-density, cross-weave Carbontex, providing zero start-up inertia and extreme thermal stability for sustained, high-drag battles.

Why Upgrade Your Heavy-Duty Okuma Low Profile?

• Eliminate the "Musky Stutter": When a big fish strikes at boat-side (the "figure-8"), you need the drag to engage instantly. Carbontex removes the jerky hesitation common in factory stacks, protecting your knots and heavy fluorocarbon leaders.

• Massive Heat Dissipation: Fighting big fish on low-profile frames generates intense internal friction. Carbon fiber handles these temperatures far better than factory composites, preventing drag "fade" or glazing during long runs.

• Modern Braid Ready: These reels are built for heavy braided lines (50lb–80lb+). Carbontex provides the consistent, non-compressible surface required to maintain 20lbs+ of steady pressure without the "mushy" feel.

• Corrosion Resilience: For Citrix and Komodo users in the salt, Carbontex is a must. It is virtually impervious to moisture and salt spray, ensuring your drag feels the same every trip.

Comprehensive Fitment & Compatibility

This kit is precision-lapped to fit the oversized internal gear stacks of Okuma’s 350 and 360-sized low-profile platforms.

Technical Note: These reels utilize a multi-washer stack (typically 3–5 washers depending on the specific sub-model). Because these reels generate significant drag pressure (up to 25 lbs+), the flatness of your stainless steel drive washers is critical. You can find high-resolution, exploded-view PDF schematics at www.reelschematic.com to verify your stack sequence.

Professional Installation & Lubrication Protocol

For high-torque baitcasters, a "wet drag" setup is the professional standard for achieving maximum smoothness and internal protection:

1. Cal’s Universal Drag Grease: Apply an ultra-thin, translucent coating of Cal’s Grease (Tan) to both sides of each Carbontex washer. This specialized PTFE grease prevents "chatter" and ensures the drag remains buttery smooth even under heavy lockdown pressure.

2. Metal Washer Inspection: Check your stainless steel drive washers for any signs of "bluing" from heat or salt scoring. Polish them with 0000 grade steel wool to a mirror finish before installing the new Carbontex.

3. Drive Gear Care: While the side plate is open, apply a light coating of Deuthlon Reel Grease to the massive brass drive gears to keep the retrieve effortless under the high torque these reels are known for.

4. Levelwind Maintenance: These reels often have synchronized levelwinds. Ensure the worm gear is clean and lightly oiled with Deuthlon Reel Oil to maintain smooth line lay during heavy runs.

SEO & Technical Summary

• Product Type: Premium Carbon Fiber Drag Washer Upgrade

• Brand: Smoothdrag (Carbontex)

• Kit ID: Okuma Low Profile Set #9

• Application: Heavy-Duty Baitcasting / Musky / Inshore / Jigging

• Key Benefits: Zero-stiction start-up, high heat tolerance, and extreme longevity.