Product Description

DAIWA HANDLE ASSEMBLY (H99-1801 / 6H991801)

Restore the manual fighting power of your deep-drop electric reel with this genuine Daiwa power handle.

The Daiwa H99-1801 Handle Assembly (standardized as 6H991801) is the factory-original replacement handle for the modern Tanacom series of electric reels. While the motor does the heavy lifting, this heavy-duty handle is essential for fine-tuning depth, jigging manually, or fighting fish near the boat when you switch off the power assist.

If your original handle arm is bent from a heavy load, or if the oversized power knob has become sticky or corroded from saltwater exposure, this complete assembly will restore the reel's ergonomics and cranking efficiency.

Product Features

• Part Number: H99-1801

• Alternate Part Number: 6H991801 (8-digit Global Code)

• Part Name: Handle Assembly

• Style: Single Power Handle with Oversized "Dendoh" Knob

• Finish: Gold Anodized Arm / Black & Gold Knob

• Fitment: Specific to Daiwa 750/1000 size electric reels.

Why Replace Your Handle?

Electric reels often sit in rod holders exposed to salt spray. The handle rivets and internal knob bearings are common failure points after years of service. A bent handle arm can also cause the knob to wobble, making manual retrieval uncomfortable. This OEM replacement ensures the handle clears the star drag and side plate perfectly.

Tech Tip: This handle fits onto the main drive shaft. When installing, ensure you inspect the Handle Nut (typically part B55-0415 or similar) and the Locking Plate. If the nut is rounded off, you won't be able to torque the new handle down sufficiently.

Compatible Models

This part is the direct replacement for the following "Dendoh" power assist reels:

Daiwa Tanacom Series:

• Tanacom 750 (T750)

• Tanacom 1000 (T1000)

Legacy Fitment Note:

• Tanacom Bull 750 / 1000: This handle generally fits the older "Bull" series frames as well, but the color finish (Gold vs. Silver/Red) may differ from your original. Please verify your drive shaft size is compatible if retrofitting onto an older model.

Installation & Schematic Verification

To ensure this handle matches your specific reel generation, please verify the part number in your reel's exploded diagram.

• Schematic Reference: You can locate and download the PDF schematic for your Tanacom reel at www.reelschematic.com.

• Alternate Number Cross-Reference: This part is listed as 6H991801 in newer Daiwa systems.

Note: This is a complete assembly (Arm + Knob). You do not need to transfer the old knob to the new arm.