Product Description

DAIWA LEVELWIND (F59-6004 / 6F596004)

Ensure perfect line lay on your deep-drop electric reel with this genuine Daiwa replacement level wind guide.

The Daiwa F59-6004 Levelwind (also identified as 6F596004) is the primary line guide assembly for the Tanacom 750 and select heavy-duty electric reels. This part travels back and forth along the worm shaft, guiding the line onto the spool under the immense tension of deep-sea fishing.

If your line is stacking unevenly, or if the guide itself is cracked, bent, or has a worn ceramic insert from heavy braided line use, replacing this unit is essential to prevent line failure and motor strain. This is an Original Equipment Manufacturer (OEM) part.

Product Features

• Part Number: F59-6004

• Alternate Part Number: 6F596004

• Part Name: Levelwind / Line Guide Assembly

• Material: Reinforced composite body with hard metal/ceramic line guide ring.

• Function: Distributes line evenly across the spool during retrieval.

• Fitment: Specific to Daiwa 750-class electric reel frames.

Why Replace Your Levelwind Guide?

The level wind guide takes the direct force of the line as it comes off the rod tip. Saltwater corrosion or high-impact "shock" from stopping a heavy sinker can damage the guide eyelet or the body of the carrier. A damaged guide can fray expensive braided line or cause the reel's auto-stop features to function incorrectly.

Tech Tip: When installing this levelwind, always inspect the Line Guide Pawl (often part 612-20601) and the Worm Shaft for damage. If the guide was stuck, the pawl is likely worn as well.

Compatible Models

This part is engineered for the 750-size chassis of Daiwa's electric reel lineup.

Daiwa Tanacom Series:

• Tanacom 750 (T750)

Daiwa Seaborg Series:

• Seaborg 750 MT (MegaTwin)

Daiwa LeoBlitz Series:

• LeoBlitz 750 MT

(Note: While this part fits the specific models listed, please check your schematic for "Tanacom Bull" models as they may use a different generation of guide).

Installation & Schematic Verification

To ensure correct fitment for your specific reel generation, please verify the part number in your reel's exploded diagram.

• Schematic Reference: You can locate and download the PDF schematic for your reel model at www.reelschematic.com.

• Alternate Number Cross-Reference: This part is listed in some systems as 6F596004.

Note: Installation requires removing the front level wind bar and the worm shaft assembly. Ensure the pawl cap is tightened securely but allows the pawl to float freely in the groove.