Product Description
Fits: Bantam 200B 3.8, Calcutta 100, 150, 100XT, Cardiff 100, 200, 300.
SmoothDrag CarbonTex Drag Washer Kit – Calcutta 100 & Cardiff Series
Upgrade your precision round reels with the SmoothDrag CarbonTex Drag Kit, precision-cut specifically for the Shimano Calcutta 100/150 and the versatile Cardiff 100, 200, and 300 series. These reels are beloved for their palming comfort and reliability in freshwater and light saltwater; adding CarbonTex washers provides the modern, silky-smooth engagement required to stop aggressive surges from bass, trout, or light-tackle coastal species.
CarbonTex washers are the industry gold standard for eliminating start-up inertia—that split-second "stickiness" that can snap light fluorocarbon or pull hooks when a fish first bolts. This kit ensures your drag remains fluid throughout the fight, bringing tournament-grade performance to these classic and workhorse frames.
Key Performance Benefits
-
Stutter-Free Startup: Virtually eliminates "drag jerk," ensuring a perfectly fluid line release even under heavy star drag settings.
-
Superior Heat Management: Carbon fiber thrives under friction, resisting the glazing and fading common with original felt or composite washers.
-
Hydrophobic Stability: Carbon fiber does not absorb moisture or swell, maintaining precise drag settings in heavy rain or high-humidity environments.
-
Linear Pressure Curve: Provides a predictable and smooth increase in drag pressure as you tighten the star drag, allowing for the fine-tuning required for technical presentations.
Compatibility & Fitment
This kit is a direct-fit upgrade for the internal drag stack of the following Shimano round reels. For exact part orientation and assembly order, please consult the official PDF schematics at www.reelschematic.com.
Fits the following models:
-
Shimano Calcutta: 100, 150 (Original Gold), 100XT
-
Shimano Cardiff: 100, 100A, 200, 200A, 300, 300A
-
Shimano Bantam: 200B (3.8:1 Gear Ratio)
Professional Maintenance & Lubrication
To achieve the legendary "silky" feel of a CarbonTex system and protect your precision brass gears, proper lubrication is essential during installation:
-
Drag Surface Treatment: Apply a very thin, translucent coating of Deuthlon Reel Grease to both sides of each CarbonTex washer. This specialized grease is formulated to withstand pressure while providing a waterproof barrier that prevents "chatter" under load.
-
Mechanical Fluidity: Use Deuthlon Reel Oil on the spool bearings and the level-wind worm gear to ensure the reel operates with zero friction, maximizing your casting distance and complementing the upgraded drag system.
Installation Tip: Before fitting your new kit, use a high-quality degreaser to remove all old, hardened grease and debris from the metal drag plates. A clean, smooth metal surface is vital for the carbon fiber to seat properly and perform at its peak.
