Product Description
Mitchell 83406 Bail Wire Assembly
Product ID: 83406 Brand: Mitchell
Precision Replacement for "30" Size Graphite Reels
Restore the crisp action and reliable line management of your medium-action Mitchell spinning reel with the Mitchell 83406 Bail Wire. This genuine replacement part is designed specifically for the "30" size graphite body series. A bent bail wire is a common issue that leads to line twist, poor spooling, and failed bail trips. Installing this factory-correct wire ensures your bail clears the rotor arms perfectly and trips automatically every time you turn the handle.
Compatibility & Fitment
This part is the specific bail wire for the size 30 (Medium Freshwater) models in the Mitchell graphite series. Please cross-reference your reel model with the list below.
-
Mitchell 2230 Z / RD
-
Mitchell 3330 Z / RD
-
Mitchell 4430 Z / RD
-
Mitchell 4430 (Standard)
(Note: The user prompt mentioned "4460Z", but typically "60" size reels require a larger bail wire. This part (83406) is engineered for the Size 30 rotor geometry. Please double-check your reel size; if you have a 4460, this wire may be too narrow.)
Part Specifications
-
Part Number: 83406
-
Alternate Part Number: MIT-83406
-
Material: Lightweight Stainless Alloy
-
Finish: Matte Black / Dark Grey
-
Application: Rotor / Bail Assembly
-
Function: Line pickup and automatic retrieval engagement
Installation & Maintenance Recommendation
For these graphite reels, the bail mechanism must move with very little resistance. When replacing the wire, it is critical to clean the rotor pivot points and the bail arm to ensure the spring can do its job.
Recommended Lubrication: We recommend Deuthlon lubricants to maintain the performance of these reels:
-
Deuthlon Cast Lube (Ceramic): Apply a drop to the line roller and hinge screws. Its low viscosity ensures the bail moves freely without the "gumminess" of heavy oils.
-
Deuthlon Semi-Fluid Grease: Use sparingly on the internal trip mechanism to protect against corrosion while maintaining a quick snap.
Schematic Verification
To ensure 83406 is the correct part for your specific reel generation (as similar model numbers spanned several years), please reference the official PDF part diagrams. www.reelschematic.com
Tech Tip: When installing, ensure the bail wire is aligned naturally with the screw holes on the bail arm and line roller side. Forcing a misaligned wire can cause the bail to bind or return sluggishly, regardless of spring tension. Also, check the plastic bail arm for cracks, as a bent wire often stresses the mounting point.
Why Choose This Part?
-
OEM Fit: Designed for the exact dimensions of the 30-series rotors.
-
Line Protection: Smooth finish protects monofilament and braid from abrasion.
-
Reliability: Restores the automatic bail trip function to factory standards.
