Product Description
Mitchell 82904 Bail Wire Bracket
Product ID: 82904 Brand: Mitchell
Essential Replacement for Ultralight "A" Series
Restore the structural integrity of your classic ultralight spinning reel with the Mitchell 82904 Bail Wire Bracket. This component (often referred to as the Bail Arm Lever or Non-Roller Side Arm) serves as the mounting point for the bail wire on the side opposite the line roller. Designed specifically for the "A" series of the legendary 308/309 family, this bracket is critical for maintaining the proper shape and tension of the bail wire assembly. A cracked or worn bracket can cause the bail to flex improperly, leading to bail trip failures and bent wires.
Compatibility & Fitment
This part is engineered for the "A" Series ultralight Planamatic reels. Please verify your reel has the "A" designation, as earlier standard models use different components.
-
Mitchell 308A (Right Hand Retrieve)
-
Mitchell 309A (Left Hand Retrieve)
-
Mitchell 358A
-
Mitchell 408A (High Speed)
(Note: This fits the "A" generation. It is not compatible with the original round-body 308 or the later 308 PRO models.)
Part Specifications
-
Part Number: 82904
-
Alternate Part Number: MIT-82904
-
Material: High-Strength Composite / Polymer
-
Color: Black
-
Position: Rotor (Opposite Line Roller)
-
Function: Connects the bail wire to the rotor and houses the bail spring mechanism on select models.
Installation & Maintenance Recommendation
When installing this bracket, you are often accessing the bail spring area. This is the ideal time to clean out old grease and ensure the spring is functioning correctly.
Recommended Lubrication: To ensure your ultralight reel performs smoothly with light lines, we recommend Deuthlon lubricants:
-
Deuthlon Semi-Fluid Grease: Apply a small amount to the pivot point of this bracket and the internal bail spring. This grease stays soft in cold weather and prevents the "sticky bail" often found in vintage reels.
-
Deuthlon Cast Lube (Ceramic): Apply a tiny drop to the screw threads to prevent corrosion and seizing.
Schematic Verification
To ensure 82904 matches your specific reel generation (especially distinguishing between the standard 308 and the 308A), please consult the official PDF part diagrams. www.reelschematic.com
Tech Tip: Be extremely careful when tightening the screw that holds the bail wire to this plastic bracket. The vintage composite material can become brittle with age; overtightening can crack the screw boss. Tighten only until snug.
Why Choose This Part?
-
Correct Geometry: Ensures the bail wire sits level, preventing line oscillation issues.
-
Direct Fit: Molded specifically for the 308A rotor mounting posts.
-
Restoration Quality: Replaces commonly cracked or cosmetically damaged original parts.
