Product Description
Mitchell 81575 Bail Wire Assembly
Product ID: 81575 Brand: Mitchell
Critical Restoration for Left-Hand "Prince" Series
Restore the heavy-duty performance of your intermediate-size Mitchell spinning reel with the Mitchell 81575 Bail Wire. Designed specifically for the Mitchell 307 and 407 series (Left-Hand Retrieve), this genuine replacement part is built to withstand the heavier drag pressures and larger lines these reels were designed for. A bent bail wire is the most common cause of bail spring fatigue, uneven line lay, and the bail arm striking the spool. Replace your worn or warped wire with this factory-specification component to ensure your reel operates smoothly and trips reliably.
Compatibility & Fitment
This part is the specific bail wire for the Left-Hand Retrieve models of the intermediate "Prince" series. Please verify your reel model matches the list below.
-
Mitchell 307 A (Left Hand)
-
Mitchell 407 A (Left Hand / High Speed)
-
Mitchell 307 (Check schematic; some late models use this wire)
(Note: This wire is designed for the Left-Hand rotor geometry. It is a mirror image of the wire used on the 306/406 and is not interchangeable with right-hand models.)
Part Specifications
-
Part Number: 81575
-
Alternate Part Number: MIT-81575
-
Material: Heavy-Gauge Chrome-Plated Steel
-
Orientation: Left-Hand Retrieve Specific
-
Position: Rotor Assembly
-
Function: Line pickup, roller positioning, and automatic retrieval engagement
Installation & Maintenance Recommendation
The 307/407 series relies on a strong bail spring and a rubber bumper to function correctly. When replacing the wire, check that the bail bumper is intact; if it is missing, the new wire may over-rotate and hit the spool.
Recommended Lubrication: To keep these durable reels running like new, we recommend Deuthlon lubricants:
-
Deuthlon Semi-Fluid Grease: Apply to the internal bail spring and the trip lever mechanism. This heavy-duty grease prevents corrosion and ensures the strong bail snaps shut with authority.
-
Deuthlon Cast Lube (Ceramic): Apply a drop to the line roller (or tungsten guide) and the bail hinge screws. This reduces friction and protects the chrome finish from pitting.
Schematic Verification
To ensure 81575 is the correct part for your specific generation of the 307/407 family, please consult the official PDF part diagrams. www.reelschematic.com
Tech Tip: If your old bail wire was bent, check the "Bail Bumper" (rubber stop) on the rotor. On 307 models, this rubber piece often rots away. Without it, the bail slams into the rotor metal-on-metal, which bends the wire. Replace the bumper when you replace the wire for a complete repair.
Why Choose This Part?
-
Correct Geometry: Pre-bent to the exact mirror-image angle required for the large 307 rotor.
-
Durability: Heavy-gauge steel construction to handle saltwater use and larger fish.
-
Line Safety: Smooth chrome finish prevents abrasion on heavy monofilament.
