Product Description
Restore the legendary stopping power and silky-smooth drag performance of your trusted Penn reel with the authentic Penn 1180917 Drag Washer, also known as part number 6-309. This essential component is the heart of Penn's renowned HT-100 drag system, trusted by anglers worldwide for its durability, reliability, and fish-stopping capabilities.
Over time and after countless battles with hard-fighting fish, the drag washers in your reel can become compressed, worn, or contaminated. This can lead to a jerky, unreliable drag, and in the worst-case scenario, a lost trophy fish. Don't let worn-out components compromise your fishing success. Replacing your old drag washers with genuine Penn 1180917 replacements will bring your reel back to factory specifications, ensuring a smooth and powerful drag you can count on when it matters most.
The Penn HT-100 Advantage
The Penn 1180917 is not just any replacement washer; it is a genuine HT-100 (High Tech 100) carbon fiber drag washer. This proprietary material from Penn offers a significant upgrade over older felt or asbestos-based drag systems. Here's what sets the HT-100 system apart:
- Unmatched Smoothness: The HT-100 carbon fiber material provides a consistent and exceptionally smooth drag, eliminating the "jerking" or "grabbing" that can cause line to break or hooks to pull. This smoothness is critical when fighting powerful fish that make long, surging runs.
- Impressive Durability and Longevity: Penn's HT-100 washers are designed to withstand the heat and friction generated during intense battles. They resist compression and degradation, ensuring a long service life and consistent performance season after season.
- Enhanced Power and Range: The HT-100 system offers a wider and more usable range of drag settings. From light, delicate pressures for finesse applications to heavy-duty stopping power for big game, you'll have precise control over the fight.
- Minimal Maintenance: While all drag systems benefit from occasional cleaning and a light application of drag grease, the robust nature of the HT-100 material means less frequent maintenance and more time on the water.
Is It Time to Replace Your Drag Washers?
If you're experiencing any of the following issues with your reel, it's likely time for a drag system overhaul with new Penn 1180917 washers:
- A jerky or inconsistent drag, especially under heavy load.
- Difficulty in making fine adjustments to your drag setting.
- A "sticky" feeling when line is first pulled from the reel.
- A noticeable decrease in your reel's maximum drag pressure.
- The drag "freezes" or becomes difficult to turn after a long fight.
Comprehensive Compatibility
The Penn 1180917 (6-309) drag washer is one of the most widely used in the Penn lineup, fitting a vast array of their most iconic and dependable conventional reels. Below is a comprehensive list of compatible models. Please note that the number of washers required per reel can vary, but a full service typically requires three of these fiber washers.
This part fits the following Penn Reel Models:
-
Jigmaster Series:
- 500
- 500L
- 500S
- 501
- 505HS
- 506HS
-
Senator Series:
- 112H
- 112H2
-
Seaboy Series:
- 185
- 190 (1990 and newer models)
-
Level Wind Series:
- 210M
- 309
- 309M
-
Sailfisher:
- 130 (Requires 5 washers and may need modification)
-
International Torque Spinning:
- TRQS7 (B, G)
- TRQS9 (B, G)
- TRQS7 (B, G)
-
Torque II Spinning:
- TRQII7500 (G, S, BLS-S)
- TRQII9500 (G, S)
-
Spinfisher Series:
- 760
- 760L
-
International Baitcast:
- 975
- 975CS
Installation and Maintenance Tip: For optimal performance, it is highly recommended to replace the keyed and eared metal drag washers that work in conjunction with the HT-100 washers. These are often sold separately or as part of a complete drag washer kit (such as the Penn 6-309SP). Always apply a very light coating of a quality drag grease, like Penn's proprietary grease, to each washer before installation. This will ensure the smoothest possible operation and extend the life of your drag system.
Invest in the longevity and performance of your Penn reel with the genuine Penn 1180917 (6-309) HT-100 Drag Washer. It's a small investment that pays huge dividends in confidence and fish-catching capability.
