Product Description
Shimano 10F3C Roller Clutch Bearing (08DDM3XH)
The Shimano 10F3C Roller Clutch Bearing is a high-precision one-way bearing that serves as the "Instant Anti-Reverse" system in premium Shimano reels. Labeled with the technical code 08DDM3XH, this component is an A-RB (Anti-Rust Bearing), meaning it has been specially treated to resist corrosion and salt crystallization, which are the primary causes of anti-reverse failure.
This bearing allows the handle to rotate forward freely but locks instantly when turned backward. Because it relies on delicate internal rollers and springs, it is sensitive to improper lubrication. If your handle has "slop" or slips backward in cold weather, the roller clutch is usually contaminated or worn. Replacing it with this genuine Japan-made (MD JP) part restores the crisp, zero-play feel essential for modern lure fishing.
Product Specifications
-
Part Name: One-Way Roller Clutch Bearing
-
Part Number: 10F3C
-
Technical Code: 08DDM3XH
-
Bearing Type: A-RB (Anti-Rust Bearing)
-
Manufacturing Origin: Made in Japan (MD JP)
-
Function: Provides instant anti-reverse (IAR) functionality.
Alternate Part Numbers
This part is often used as a direct upgrade or replacement for several legacy and regional part numbers:
-
BNT4225
-
TGT2020
-
10F3D (Similar variant, check schematic for specific fitment)
Compatibility & Fitment
The 10F3C is a high-spec bearing found in many of Shimano’s high-performance baitcasting and small conventional reels. It is a direct factory fit for the following series:
-
Shimano Chronarch Series: CH-200E7, CH-200E6, CH-50E (and corresponding left-hand models)
-
Shimano Curado Series: CU-200E7, CU-200E5, CU-50E
-
Shimano Scorpion Series: 1000XT, 1500XT (JDM Models)
-
Shimano Aldebaran Series: Select legacy MG and BFS models
-
Shimano Calcutta Conquest: Fits various 100/200 size frames (Verify via 08DDM code)
Key Features
-
A-RB Technology: Features at least 10x the corrosion resistance of standard stainless steel bearings, crucial for saltwater baitcasting.
-
Instant Engagement: Designed for "zero back-play," ensuring that hook sets are immediate and energy is transferred directly to the drag.
-
Japan-Made Precision: Manufactured to the highest tolerances in Shimano’s Japanese facilities for maximum longevity.
-
Low Inertia: Optimized to provide minimal resistance during the retrieve, contributing to the "fluid" feel of high-end Shimano reels.
Critical Maintenance Tip
Do Not Grease: The internal rollers of the 10F3C should never be packed with grease. Heavy grease will cause the rollers to "float" and fail to engage the inner tube, leading to a slipping handle. Only use a single drop of a very light oil (like Shimano Bantam Oil) or run it completely dry if you fish in extremely cold climates.
