Product Description

SHIMANO 104VP BEARING (RD11109 & TGT1202)

Enhance Rotation & Sensitivity

The Shimano 104VP Ball Bearing (Part No. RD11109 / TGT1202) is a high-precision, genuine OEM stainless steel bearing used in critical rotating assemblies across Shimano’s spinning and casting reel lineups. Whether located in the handle knob, the line roller, or supporting the worm shaft, this bearing is essential for reducing friction and delivering that "silky smooth" Shimano feel.

If your reel feels gritty when reeling, or if your line roller is seized (causing line twist), this bearing is the standard replacement. It is also a popular upgrade part for anglers looking to replace plastic bushings (often found in lower-tier reel handle knobs) with true ball bearings for increased sensitivity and cranking power.

Product Specifications

• Part Name: Ball Bearing

• Manufacturer: Shimano

• Part Number (MPN): RD11109 (Spinning/Freshwater code)

   

• Alternate Part Number: TGT1202 (Saltwater/Convention code)

   

• Schematic Code: 104VP

• Dimensions: 4mm x 7mm x 3mm (Common size - Please verify with your specific schematic)

• Material: Stainless Steel (Shielded)

Compatible Models

This is one of the most versatile small bearings in the Shimano catalog, fitting hundreds of models. Common applications include:

• Handle Knob Bearing: Fits the "Type A" handle knobs found on most Shimano reels (Stradic, Curado, Citica, Sustain, etc.).

• Line Roller Bearing: Used in the line roller assembly of select P4 and mid-range spinning reels (e.g., older Symetre, Sahara, Sedona).

• Worm Shaft Bearing: Supports the level wind worm shaft on many baitcasting reels (Curado, Citica, Caenan).

• Specific Models:

  • Spinning: Stradic FI/FJ, Symetre FL, Sahara FE, Sedona FD.

  • Baitcasting: Curado G, Citica G, Caenan.

  • Saltwater: Talica (Handle Knob), Tyrnos (Handle Knob).

Installation & Reference

To ensure this is the correct bearing for your specific reel location, please cross-reference the part number RD11109 or TGT1202 with your reel's service diagram.

• Schematic Diagrams: For detailed PDF schematics and part location verification, please visit www.reelschematic.com.

• Alternate Part Number: RD11109 / TGT1202

   

Installation Tip: If installing this into a handle knob that previously had a plastic bushing, you may need a Washer/Shim (often 4x6x0.1mm) to prevent the knob from having too much play. If installing in a line roller, ensure the bearing is oriented correctly with the internal collar/spacer to allows it to spin freely under line pressure.