Product Description
SmoothDrag CarbonTex Drag Washer Kit – Tekota 700 & 800 Series
Upgrade the saltwater level-wind workhorse with the SmoothDrag CarbonTex Drag Kit, specifically engineered for the Shimano Tekota 700 and 800 series. These reels are widely used for medium-to-heavy trolling, bottom fishing, and deep-dropping.
Replacing the factory drag washers with CarbonTex provides smooth drag operation under heavy pressure. The kit is designed to reduce start-up inertia and help maintain consistent drag performance during demanding fights with bottom fish and pelagic species.
Why Use CarbonTex Drag Washers on Tekota 700 & 800 Reels?
CarbonTex washers are a modern alternative to the original factory Dartanium materials. By reducing the stickiness associated with start-up inertia, the CarbonTex system helps provide fluid line release when the drag is engaged.
Key Performance Benefits
- Stutter-Free Startup: Virtually eliminates "drag jerk," ensuring smooth line release even under high drag settings used for deep-water species.
- Superior Heat Management: Carbon fiber resists the glazing and fading that can occur with older factory washers during long, heavy-load battles.
- All-Weather Reliability: Carbon fiber does not absorb moisture or swell, helping maintain precise drag settings in salt spray, rain, and high-humidity offshore conditions.
- Precision Fit: Custom-cut to match the specific internal dimensions of the Tekota 700 and 800 gear sleeves.
Shimano Tekota 700 & 800 Compatibility
This kit is a precision-cut, direct-fit upgrade for the internal drag stack of the following Shimano level-wind reels:
- Shimano Tekota 700 — Original Gold/Silver series
- Shimano Tekota 800 — Original Gold/Silver series
- Shimano Tekota 700LC / 800LC — Line Counter models
For exact part orientation and assembly order, consult the official PDF schematics at ReelSchematic.com.
How Should CarbonTex Washers Be Maintained?
Proper lubrication is important when servicing a CarbonTex drag system and protecting the reel's internal components during saltwater use.
- Drag Surface Treatment: Apply a very thin, translucent coat of Deuthlon Reel Grease to both sides of each CarbonTex washer. This grease is formulated for high-pressure applications and helps provide a waterproof barrier.
- Mechanical Protection: Use Deuthlon Reel Oil on the spool bearings and level-wind worm gear to support smooth reel operation.
Installation Tip
Before fitting the new kit, use a high-quality degreaser to remove old, hardened grease and salt deposits from the metal eared and keyed washers. A clean, smooth metal surface allows the CarbonTex washers to seat properly and helps the drag system operate as intended.
Frequently Asked Questions
What reels does the CarbonTex Drag Washer Kit fit?
The CarbonTex Drag Washer Kit is designed for Shimano Tekota 700 and 800 series reels, including the original Gold/Silver models and the Tekota 700LC and 800LC Line Counter models. Always verify the reel model before ordering.
What is the benefit of replacing Tekota factory Dartanium washers?
The CarbonTex kit replaces the original factory Dartanium drag material with carbon fiber washers. The design helps reduce start-up inertia and provides smoother drag engagement during heavy-load fishing, including trolling, bottom fishing, and deep-dropping.
Are these CarbonTex washers a direct fit for Tekota 700 and 800 reels?
Yes, the kit is precision-cut as a direct-fit replacement for the internal drag stack of applicable Shimano Tekota 700 and 800 reels. The correct assembly order and washer orientation should be confirmed using the appropriate reel schematic before installation.
Can this kit be used on Shimano Tekota 700LC and 800LC reels?
Yes. The listed compatibility includes Shimano Tekota 700LC and 800LC Line Counter models. Since reel configurations can vary, compare your exact model with the product compatibility information before installing the CarbonTex drag washer kit.
How should CarbonTex drag washers be lubricated?
The existing product instructions recommend applying a very thin coat of Deuthlon Reel Grease to both sides of each CarbonTex washer. Deuthlon Reel Oil is recommended for the spool bearings and level-wind worm gear as part of reel maintenance.
What should I do before installing the Tekota CarbonTex kit?
Before installation, remove old hardened grease and salt deposits from the metal eared and keyed washers using a high-quality degreaser. A clean metal surface helps the CarbonTex washers seat correctly within the drag stack.
