Ambassadeur 6500Ct Sports Mag 11 01

Technical Service Manual: Ambassadeur 6500CT Sports Mag (11 01)

The Ambassadeur 6500CT Sports Mag (version 11 01) represents a refined iteration of the adjustable magnetic braking series. Built for the specialized angler who demands precision over distance, the 11 01 features a high-speed retrieve and an open-frame design. Maintenance on this model is streamlined but requires strict attention to the magnetic carriage and the spool's lateral alignment to ensure the "Sports Mag" remains a top-tier casting tool.

Mechanical Architecture: The CT Advantage

In accordance with the 11 01 engineering schematics, this reel is a dedicated CT (Casting Tournament) model. It is designed without a levelwind system, meaning there are no idler gears or levelwind worm gears to service. This lack of peripheral gearing significantly reduces mechanical drag, allowing the spool to reach higher maximum velocities while relying entirely on the magnetic slider for braking.

Disassembly and Internal Cleansing

Begin by removing the three thumb screws on the right side plate to access the drive gear. Remove the spool and set it aside to protect the shaft ends.

• Gear Inspection: Remove the main gear and the drag stack. Use a specialized degreaser to strip away old, oxidized lubricants. Inspect the pinion gear for any chipped teeth, which can occur if the reel is engaged during a high-speed cast.

• Magnet Maintenance: Unlike centrifugal versions, the 11 01 uses a sliding magnetic tray. Carefully wipe the magnets with a microfiber cloth to remove any metallic dust or salt particles that may have bypassed the side plate seals.

Precision Lubrication Protocol

To maintain the high-performance standards of the Sports Mag series, use the following lubrication strategy:

• Primary Drive System: Apply a high-adhesion grease to the main gear and the pinion gear. This ensures the power transmission remains silent and smooth under the heavy load of a fighting fish.

• Pivot and Contact Points: Apply Deuthlon oil to the clicker cog and the spool spindle contact points. Deuthlon’s specialized formula provides a superior boundary layer that prevents salt-induced galling on these fast-moving surfaces.

• High-Speed Bearings: The spool bearings should be flushed until surgically clean and then treated with a single drop of light oil to facilitate the rapid startup speeds this reel is famous for.

Drag and Braking Calibration

The 11 01 utilizes a high-friction drag stack. Ensure each washer is free of debris. When reassembling, verify that the curved spring washers (Belleville washers) are positioned correctly to allow the star drag to provide a linear increase in pressure.

Final Assembly and Bench Testing

Slide the spool back into the frame, ensuring the magnetic carriage is set to the "maximum" position for safety during the first test. Reattach the right side plate, ensuring the drive shaft is centered. Once the handle nut is locked and the screw is tightened, rotate the magnetic dial; the spool should show a visible change in "free spin" duration as the magnets move. This calibration ensures that your Ambassadeur 6500CT Sports Mag is ready for the rigors of the shoreline.