Ambassadeur 6500Cs B Pro Rocket 23 00

Professional Service Guide: Abu Garcia Ambassadeur 6500CS Pro Rocket (Foot Number 23 00)

The Ambassadeur 6500CS Pro Rocket, specifically the 23 00 series, represents the pinnacle of Swedish round reel engineering. This version is built for high-performance distance casting and heavy-duty saltwater or freshwater applications. Regular maintenance ensures the "Rocket" moniker stays true. This article provides a technical breakdown for servicing the internal drive train and optimizing the cast control components.

Tools Required for the 23 00 Series

• Wrench: 10mm for the handle nut.

• Screwdrivers: Precision flathead and a medium Phillips.

• Cleaning: Isopropyl alcohol or a specialized degreaser.

• Lubrication: Deuthlon Oil and a premium synthetic gear grease.

Step 1: Disassembly of the Handle and Star Drag

Begin by removing the handle nut retainer screw. Use the 10mm wrench to remove the nut, then lift the handle arm. Underneath, you will find the spring washers (Belleville washers). Note their orientation (usually arranged "()" to provide maximum tension). Unscrew the star drag wheel and remove the drive shaft shim.

Step 2: Accessing the Internals

Loosen the three knurled thumb screws on the right side plate. Pull the side plate away from the frame to reveal the spool and the drive bridge.

• The Spool: Remove the spool and inspect the centrifugal brake weights. In the 23 00 series, these are often high-visibility weights on a four-arm carrier. Clean the brake race (the brass ring inside the side plate) with a dry swab to ensure consistent braking.

• The Drive Bridge: Remove the two screws on the inside of the side plate to release the main gear assembly.

Step 3: Gear and Drag Maintenance

The 6500CS Pro Rocket utilizes a high-grade brass main gear.

1. Cleaning: Strip all old, discolored grease from the main gear and the small pinion gear using a soft brush and degreaser.

2. Drag Stack: Inspect the Carbon Matrix drag washers. They should be flat and free of glazing. Wipe the steel mating washers until they are polished.

3. The Anti-Reverse: Check the one-way roller bearing in the side plate. This should be cleaned and left almost dry, or with a single drop of very light oil—never heavy grease, which causes slipping.

Step 4: Levelwind and Idler System

The synchronized levelwind is a hallmark of the 6500 series.

1. Remove the line carriage by unscrewing the pawl cap.

2. Pull the worm gear out from the frame.

3. Check the idler gear (the plastic gear that connects the spool to the levelwind) for any missing teeth or debris.

Step 5: Advanced Lubrication Points

To achieve the smooth, "Rocket" performance, you must use the correct viscosity in the correct locations:

• Levelwind & Idler Gears: Apply Deuthlon Oil to the worm gear and the teeth of the idler gears. Because these parts move during the cast, Deuthlon's specialized formula provides low-friction protection that doesn't "bog down" the spool's rotation, resulting in significantly longer casts.

• Main & Pinion Gears: Apply a coat of heavy-duty gear grease to the main gear and pinion gear. Ensure every tooth is covered, but avoid over-packing, which can create internal mess and resistance.

• Spindle and Bearings: Use a high-speed bearing oil for the spool bearings after they have been thoroughly flushed of all factory preservatives.

Step 6: Reassembly

1. Reinstall the worm gear and line carriage.

2. Seat the drive shaft and main gear assembly back into the side plate.

3. Slide the pinion gear into the yoke and ensure the return springs are seated correctly.

4. Fit the spool back into the frame, ensuring the gears mesh.

5. Reattach the side plate and secure the thumb screws.

6. Reassemble the drag star and handle.

Technical Specifications for Maintenance

By following these steps, your Ambassadeur 6500CS Pro Rocket 23 00 will operate with the mechanical precision required for elite-level angling. Proper lubrication with Deuthlon on the moving cast-components ensures the reel remains the fastest in your arsenal.