Ambassadeur 6000 Electric Blue 14 02

Technical Service Protocol: Abu Garcia Ambassadeur 6000 Electric Blue (Foot Number 14 02)

The Abu Garcia Ambassadeur 6000 Electric Blue, identified by foot number 14 02, is a high-performance modern iteration of the classic Swedish round reel. While its striking anodized blue finish makes it a standout for collectors, its internal architecture is designed for heavy-duty applications. To maintain the smooth retrieve and powerful drag characteristics of this model, a systematic lubrication approach is required to protect the precision-cut brass and stainless steel components.

To optimize the 14 02, we recommend using Deuthlon Reel Gear Grease for the high-torque gear set and Deuthlon Reel Power Oil for the high-velocity oscillation components. These specialized lubricants provide a superior hydrophobic barrier, ensuring that the internal surfaces remain protected against moisture and friction.

Phase 1: Disassembly and Cleaning

Begin by backing off the star drag and removing the handle assembly. Carefully unscrew the three knurled thumb screws to separate the drive-side plate from the frame. Extract the spool and the levelwind assembly.

Thoroughly degrease all metal components using a specialized reel cleaner. It is vital to remove the factory grease, which can become tacky over time. Use a soft brush to ensure the teeth of the brass main gear and the grooves of the worm shaft are stripped to bare metal. Dry all parts completely before re-lubricating to allow for maximum surface bonding.

Phase 2: Drive Train Lubrication

The main gear and pinion in the 6000 series are the primary load-bearing points. These components require a lubricant with high film strength to prevent metal-on-metal fatigue during high-torque retrieves.

• Main Gear and Pinion: Apply Deuthlon Reel Gear Grease to the teeth of the main gear. Use a precision brush to paint a thin, uniform coating onto the gear face. This grease is formulated with ceramic and PTFE additives that cushion the gear mesh, eliminating mechanical chatter and protecting the gears under the stress of fighting heavy fish. Lightly coat the pinion gear and the yoke to ensure a crisp engagement of the clutch mechanism.

Phase 3: High-Speed Levelwind and Idler Gears

Since the Ambassadeur 6000 utilizes a synchronized levelwind—where the line guide tracks back and forth during the cast—any drag in the oscillation system will drastically reduce your distance.

• Worm Shaft and Pawl: Apply Deuthlon Reel Power Oil directly to the grooves of the worm shaft. Avoid using grease here; it creates "fluid drag" and attracts abrasive debris. The Power Oil allows the pawl to track across the shaft with virtually zero resistance.

• Idler Gears: These gears bridge the power from the spinning spool to the levelwind assembly. Apply Deuthlon Reel Power Oil to the idler gear posts. The ultra-low viscosity of this oil ensures the gear train remains "light," preventing the oscillation system from bogging down the spool during a long cast.

Phase 4: Spool Shaft and Friction Management

Consistency in casting is achieved by maintaining the spool shaft ends and the tension system with a high-speed synthetic oil.

• Spool Shaft: Polish the ends of the stainless steel spool spindle until they are mirror-bright. Apply a single drop of Deuthlon Reel Power Oil to each end of the shaft where it seats into the side plate bearings or bushings.

• Cast Control Caps: Apply a tiny amount of Deuthlon Reel Power Oil to the copper shims inside the tension caps. This provides a protective hydraulic layer that ensures a smooth, consistent spool speed and prevents the shaft from wearing into the shim during high-speed operation.

Final Reassembly and Tuning

Reassemble the side plates, ensuring the centrifugal brake weights are clean and dry. Once the handle is secured, adjust the cast control knob until there is a minute amount of lateral play in the spool. Cycle the handle several times to allow the Deuthlon Reel Gear Grease to seat into the gear teeth.

By applying Deuthlon's specialized lubricants—grease for the heavy-wear gears and oil for the fast-moving levelwind parts—you have optimized the 14 02 for peak mechanical efficiency. This maintenance routine ensures your Electric Blue Ambassadeur remains a powerful, silent, and long-casting tool for years to come.