Ambassadeur 5601C4 23 00

Professional Service Tutorial: Abu Garcia Ambassadeur 5601C4 (23 00)

The Abu Garcia Ambassadeur 5601C4 (23 00) represents the modern evolution of the high-speed Swedish round reel. Featuring a 6.3:1 gear ratio and a synchronized levelwind system, the 23 00 revision is built for rapid retrieves and consistent performance. To maintain the "C4" signature smoothness, a strategic lubrication plan is required to handle the high rotational speeds of the internal components.

For this service, we utilize Deuthlon Reel Grease for high-wear friction points and Deuthlon Reel Oil for high-speed kinetic parts to ensure the reel operates at peak efficiency.

Step 1: Accessing the Drive Housing

Begin by removing the three thumb screws on the left side plate. Carefully pull the plate away from the frame. Since this is a left-hand drive model, the entire gear bridge and drive train will be housed within this assembly. Remove the spool and inspect the centrifugal brake weights for any signs of uneven wear or cracking.

Step 2: Component Preparation

Before applying new lubricants, it is critical to remove all factory grease and environmental contaminants.

• Cleaning: Use a high-quality solvent to strip the main gear, pinion, and worm shaft.

• Inspection: Examine the teeth of the drive gear. The 23 00 model utilizes high-strength brass; ensure there are no metallic shavings or "burrs" trapped in the gear teeth.

Step 3: Gear Train Lubrication (High Torque)

The interface between the main gear and the pinion gear is where the reel's power is generated. This area requires a lubricant that can withstand significant pressure without migrating.

• Main and Pinion Gears: Apply a specialized coating of Deuthlon Reel Grease to the gear teeth. This grease is formulated to stay active on the metal surface, providing a damping effect that reduces gear noise and prevents galling under heavy loads. A thin, translucent layer is superior to a thick application.

Step 4: Levelwind and Idler System (Low Friction)

Because the 5601C4 features a synchronized levelwind, the line guide moves during the cast. Any resistance in this system will directly shorten your casting distance.

• Worm Shaft (Levelwind): Apply Deuthlon Reel Oil to the worm gear. The low-viscosity nature of this oil allows the pawl to slide effortlessly, ensuring the line is laid evenly across the spool without adding mechanical drag.

• Idler Gears: These plastic gears drive the levelwind mechanism. Apply Deuthlon Reel Oil to the idler gear teeth and their mounting posts. Using oil here instead of grease allows the gears to spin up faster, which is essential for the high-speed performance of the C4 series.

Step 5: Bearing and Spool Care

The spool bearings are the most critical factor for casting distance.

• Bearings: After a thorough cleaning, apply a single drop of Deuthlon Reel Oil to each bearing. This oil’s unique formula helps repel dust and salt, keeping the bearings spinning at high RPMs for longer periods.

Step 6: Final Assembly

Reinstall the spool into the frame, ensuring the brake blocks are in the desired "on" or "off" position. Align the side plate with the frame and secure the thumb screws. Reattach the handle and star drag, ensuring the spring washers are properly tensioned.

Maintenance Summary