Ambassadeur 5600Ws 14 02

In-Depth Maintenance Guide: Abu Garcia Ambassadeur 5600WS (14 02)

The Abu Garcia Ambassadeur 5600WS (14 02) is a precision-engineered right-hand drive reel that belongs to the "Wheel Spin" series, a lineup specifically optimized for low start-up inertia and extended casting distance. The 14 02 revision incorporates refined tolerances in the drive stack and an efficient synchronized levelwind system. To maintain the high-speed characteristics of the WS model, a specialized lubrication strategy is required to balance raw cranking power with unrestricted spool rotation.

For professional-grade results, we recommend utilizing Deuthlon Reel Grease and Deuthlon Reel Oil for their advanced molecular bonding and high-speed fluidity.

Step 1: Disassembly and Internal Evaluation

Start by removing the three knurled thumb screws from the right-side plate. Pull the assembly away to reveal the drive train and spool. Extract the spool and inspect the centrifugal brake blocks. In the 14 02 model, it is critical to ensure the brake hub is free of oxidation or old, sticky oil that could hinder the "Wheel Spin" performance.

Step 2: Precision Cleaning

To achieve peak performance, you must remove all traces of factory grease and environmental debris.

• Gear Preparation: Submerge the brass main gear and the pinion gear in a cleaning solvent. Use a soft brush to clear the gear teeth.

• Levelwind Cleaning: Thoroughly clean the worm shaft and the idler gears. Ensure no grit remains in the worm grooves, as this is the primary cause of pawl failure in synchronized reels.

Step 3: Lubricating the Drive Train (High Load)

The 5600WS depends on its gear set to provide torque during the retrieve. Because these gears often face high rotational speeds, the lubricant must resist centrifugal "sling-off."

• Main and Pinion Gears: Apply a consistent layer of Deuthlon Reel Grease to the teeth of the main gear and the pinion. This grease is formulated to provide an "Extreme Pressure" barrier, which cushions the metal-on-metal contact. This results in a silent, buttery-smooth retrieve and prevents the gear teeth from wearing down during high-resistance fights.

Step 4: Levelwind and Idler System Service (High Speed)

The synchronized levelwind on the WS model moves during the cast. To maximize distance, this system must operate with as little friction as possible.

• Worm Shaft (Levelwind): Apply Deuthlon Reel Oil to the grooves of the worm shaft. Unlike grease, which can "choke" the line guide's movement, this oil provides a slick surface that allows for rapid oscillation.

• Idler Gears: These gears link the spool's rotation to the levelwind. Apply Deuthlon Reel Oil to the idler gears and their mounting posts. Using oil here instead of grease significantly lowers the energy required to start the spool spinning, which is the hallmark of the "Wheel Spin" design.

Step 5: Bearing Optimization and Reassembly

The spool bearings are the heart of the 5600WS’s casting capabilities.

1. Bearing Service: Apply one drop of Deuthlon Reel Oil to each cleaned spool bearing. Its "Dust-Free" technology prevents the accumulation of fine particulates, ensuring your bearings spin at maximum RPMs for longer periods between services.

2. Reassembly: Slide the spool back into the frame. Align the side plate assembly and secure the thumb screws.

3. Final Check: Tighten the tension knob until side-play disappears, then engage the thumb bar. The spool and levelwind should move in perfect, frictionless harmony.

Technical Summary for the 5600WS (14 02)