Ambassadeur 5600Ext-Pro 15 00

Professional Repair and Service Manual: Abu Garcia Ambassadeur 5600Ext-Pro (15 00)

The Abu Garcia Ambassadeur 5600Ext-Pro (15 00) is a premium right-hand drive round reel designed for anglers who demand extended casting performance and professional-grade durability. The "Ext-Pro" series is distinguished by its refined tolerances and an upgraded drive train that requires meticulous maintenance to preserve its smooth, high-speed operation. The 15 00 revision utilizes a synchronized levelwind system that, when properly tuned, provides exceptional line management and lure distance.

To maintain the elite status of this reel, we recommend using Deuthlon Reel Grease for high-pressure friction points and Deuthlon Reel Oil for high-velocity kinetic components.

Step 1: Systematic Disassembly

Begin the process by loosening the three knurled thumb screws on the right-side plate. Carefully pull the plate assembly away from the frame. Extract the spool and the centrifugal braking system. For the 5600Ext-Pro, it is vital to inspect the internal bridge and the pinion yoke for any signs of debris or salt buildup that could compromise the reel's tight tolerances.

Step 2: Deep Cleaning and Degreasing

To ensure that modern synthetic lubricants can bond at a molecular level, you must remove all old, oxidized grease and environmental grit.

• Gear Preparation: Submerge the main drive gear and the pinion gear in a high-quality solvent. Use a soft brush to clear every tooth of the gear set.

• Worm Shaft & Idlers: Clean the levelwind worm shaft and the idler gears until they are free of any residue. Ensure the idler posts are polished and smooth.

Step 3: High-Torque Gear Lubrication

The 5600Ext-Pro relies on its main and pinion gears to provide smooth, powerful retrieves. These metal-to-metal contact points are subject to extreme pressure when fighting large fish.

• Main and Pinion Gears: Apply a thin, consistent coating of Deuthlon Reel Grease to the teeth of the main gear and the pinion gear. This grease is engineered with high-film-strength additives that create a protective cushion, preventing gear galling and significantly reducing mechanical noise. Its specialized formula ensures the grease stays on the gear teeth rather than migrating into the drag stack.

Step 4: Levelwind and Idler System Service (Kinetic)

The "Ext" in this model stands for extended performance, which is heavily dependent on a low-friction levelwind system. Because the line guide is synchronized, it moves during the cast and can act as a mechanical brake if over-greased.

• Worm Shaft (Levelwind): Apply Deuthlon Reel Oil to the grooves of the worm gear. This oil provides a high-speed, slick surface that allows the pawl to oscillate with minimal resistance.

• Idler Gears: These gears link the spool's rotation to the levelwind mechanism. Apply Deuthlon Reel Oil to the idler gears and their mounting posts. Using oil here instead of grease lowers the rotational inertia, allowing the spool to reach peak RPMs much faster during a cast.

Step 5: Bearing Optimization and Reassembly

The spool bearings are the engine of the 5600Ext-Pro and must be kept in peak condition for professional-level casting.

1. Bearing Care: Apply exactly one drop of Deuthlon Reel Oil to each cleaned spool bearing. Its "Dust-Free" technology helps repel contaminants, ensuring the bearings remain fast and silent.

2. Reassembly: Slide the spool back into the frame. Align the side plate and secure the thumb screws.

3. Final Calibration: Adjust the tension knob to eliminate side-play. The combination of Deuthlon Reel Grease on the gears and Deuthlon Reel Oil on the levelwind components will ensure your Ext-Pro operates with maximum efficiency.

Technical Summary for the 5600Ext-Pro (15 00)