Ambassadeur 5600D5 1301

Technical Maintenance Protocol: Abu Garcia Ambassadeur 5600D5 (13 01)

The Abu Garcia Ambassadeur 5600D5 (13 01) is a specialized right-hand drive round reel known for its unique "Smart Mag" and multi-disk braking system. The 13 01 revision features a distinctive gear ratio and a synchronized levelwind designed for consistent lure presentation. Because the D5 series utilizes a complex mechanical interface to manage spool speed, maintaining the internal drive train with precision lubricants is vital to prevent "drag" in the casting cycle.

To ensure your 5600D5 retains its smooth, powerful performance, we recommend a complete service using Deuthlon Reel Grease and Deuthlon Reel Oil.

Phase 1: Disassembly and Bridge Access

Begin by removing the three knurled thumb screws from the right-side plate. Carefully pull the plate away from the frame to expose the main gear assembly. Slide the spool out and inspect the brake blocks and the magnetic assembly. For the 13 01 model, check the pinion yoke and the spring tension to ensure the engagement remains crisp.

Phase 2: Ultrasonic or Solvent Cleaning

Before applying new lubricants, every component must be stripped of old, contaminated grease and environmental grit.

• Main Gears: Submerge the main drive gear and the pinion gear in a cleaning solvent. Use a soft brush to ensure every tooth is clear of debris.

• Levelwind System: Clean the worm shaft and the idler gears until the metal and polymer surfaces are bright. Residual grit in the worm shaft is the primary cause of pawl stutter in the D5 series.

Phase 3: High-Torque Gear Lubrication

The 5600D5 depends on its gear set to provide cranking power under load. These contact points require a lubricant that can handle high rotational pressure without thinning out.

• Main and Pinion Gears: Apply a thin, even coat of Deuthlon Reel Grease to the teeth of the main gear and the pinion gear. This grease is formulated with high-film-strength additives that create a durable cushion between the metal surfaces. This results in a silent retrieve and prevents the brass components from wearing down during heavy use. The specialized formula ensures the grease stays bonded to the gears rather than migrating into the drag washers.

Phase 4: Levelwind and Idler Gear Optimization

Because the 5600D5 features a synchronized levelwind, the line guide moves during the cast. To prevent this system from acting as a mechanical brake on your lure, you must use a low-viscosity lubricant.

• Worm Shaft (Levelwind): Apply Deuthlon Reel Oil to the grooves of the worm shaft. Oil provides a much faster, slicker surface than grease, allowing the line guide to oscillate effortlessly across the frame.

• Idler Gears: These gears link the spool's rotation to the levelwind assembly. Apply Deuthlon Reel Oil to the idler gears and their mounting posts. Using oil here instead of grease significantly lowers the rotational inertia, which is critical for maintaining the high-speed startup required for modern casting.

Phase 5: Spool Bearings and Final Reassembly

The spool bearings must be optimized for maximum RPMs while resisting the elements.

1. Bearing Care: Apply exactly one drop of Deuthlon Reel Oil to each cleaned spool bearing. Its "Dust-Free" technology helps repel fine particles, keeping the bearings fast and quiet.

2. Reassembly: Slide the spool back into the frame. Align the side plate assembly and secure the thumb screws.

3. Function Check: Engage the free spool and verify that the levelwind travels fluidly across the frame. With Deuthlon Reel Grease on the drive gears and Deuthlon Reel Oil on the levelwind components, the 5600D5 will operate with professional-grade precision.

Technical Summary for the 5600D5 (13 01)