Ambassadeur 5600Cl Rocket (12-00)

Technical Service and Repair Manual: Abu Garcia Ambassadeur 5600Cl Rocket (12-00)

The Abu Garcia Ambassadeur 5600Cl Rocket (12-00) is the definitive right-hand drive round reel for anglers seeking maximum casting distance without compromising on structural integrity. The "Rocket" series is famous for its lack of a mechanical spool vent, creating a perfectly balanced spool that spins at incredibly high RPMs. The 12-00 revision utilizes a synchronized levelwind and a high-speed gear set that requires precision maintenance to ensure the "Rocket" performance remains intact.

To maintain this reel's elite status, we utilize Deuthlon Reel Grease for heavy-load gears and Deuthlon Reel Oil for high-velocity kinetic components.

Step 1: Systematic Teardown

Begin by unscrewing the three knurled thumb screws on the right side plate. Carefully pull the plate away from the frame to expose the drive train. Extract the spool and the centrifugal brake hub. For the 12-00 model, it is vital to check the brass main gear and the bridge assembly for any signs of old, oxidized grease that could create mechanical "choke" during a cast.

Step 2: Component Degreasing and Cleaning

For modern synthetic lubricants to bond at a molecular level, the internal surfaces must be surgically clean.

• Main Drive Train: Submerge the main gear and the pinion gear in a specialized cleaning solvent. Use a soft brush to remove all debris from the gear teeth.

• Levelwind System: Thoroughly degrease the worm shaft and the idler gear posts. Any residual grit in the worm grooves will act as a brake on the synchronized line guide.

Step 3: High-Torque Gear Lubrication

The 5600Cl Rocket's power is generated by its high-speed gear set. These contact points require a lubricant that provides a high-strength film to prevent metal fatigue during heavy retrieves.

• Main and Pinion Gears: Apply a thin, consistent coating of Deuthlon Reel Grease to the teeth of the main gear and the pinion. This grease is formulated with high-film-strength additives that cushion the gear interaction, providing a silent, buttery-smooth retrieve. The specialized formula ensures the grease stays bonded to the teeth, preventing it from being slung into the drag stack even at high rotational speeds.

Step 4: Levelwind and Idler System Optimization (Kinetic)

Because the levelwind on the Rocket is synchronized, the line guide moves during the cast. To maintain the "Rocket" namesake, the lubrication must be as light as possible to minimize parasitic drag.

• Worm Shaft (Levelwind): Apply Deuthlon Reel Oil to the grooves of the worm shaft. Oil provides a much faster, slicker surface than grease, allowing the line guide to oscillate across the frame with zero hesitation.

• Idler Gears: These gears link the spool's rotation to the levelwind mechanism. Apply Deuthlon Reel Oil to the idler gears and their mounting posts. Using oil here instead of grease significantly lowers the rotational inertia, allowing the spool to reach peak RPMs much faster during the cast.

Step 5: Bearing Care and Final Reassembly

The spool bearings are the engine of your casting performance and must be kept in pristine condition.

1. Bearing Lubrication: Apply exactly one drop of Deuthlon Reel Oil to each cleaned spool bearing. Its "Dust-Free" technology helps repel fine particles, ensuring your bearings stay fast and quiet.

2. Reassembly: Slide the spool back into the frame. Align the side plate assembly and secure the thumb screws.

3. Final Tuning: Adjust the mechanical tension knob to eliminate side-play. The combination of Deuthlon Reel Grease on the drive gears and Deuthlon Reel Oil on the levelwind components ensures your 5600Cl Rocket operates with world-class fluidity.

Technical Performance Summary