Ambassadeur 5600CB 0802

Professional Repair and Maintenance Article: Abu Garcia Ambassadeur 5600CB (0802)

The Abu Garcia Ambassadeur 5600CB (0802) is a specialized right-hand drive round reel featuring the classic "Self-Braking System." This design was engineered to provide effortless casting control, but its mechanical complexity requires a disciplined lubrication schedule. The 0802 revision utilizes a high-torque brass gear set and a synchronized levelwind that must remain friction-free to allow the centrifugal braking hub to function with precision.

To achieve peak mechanical fluidity, we recommend a complete service using Deuthlon Reel Grease and Deuthlon Reel Oil.

Phase 1: Disassembly and Internal Access

Begin by unscrewing the three knurled thumb screws on the right side plate. Remove the assembly to expose the drive train. Extract the spool and inspect the centrifugal brake hub. In the 0802 model, check the brake blocks and the interior of the brake drum for any residue or old, thickened grease that could cause the "Self-Braking" system to become inconsistent or fail.

Phase 2: Comprehensive Degreasing

To ensure that modern synthetic lubricants bond correctly to the metal, all traces of factory residue and environmental grit must be eliminated.

• Drive Train: Submerge the main drive gear and the pinion gear in a high-quality solvent. Use a soft brush to clear every tooth of the gear set.

• Levelwind Assembly: Thoroughly degrease the worm shaft and the idler gear posts. These areas are prone to collecting dust and salt spray, which can create a grinding paste that destroys the levelwind pawl over time.

Phase 3: High-Torque Gear Lubrication

The 5600CB depends on its gear interface to handle the load of the retrieve. This area experiences the highest pressure within the reel and requires a lubricant that resists being squeezed out under tension.

• Main and Pinion Gears: Apply a thin, consistent coating of Deuthlon Reel Grease to the teeth of the main gear and the pinion gear. This grease is formulated with high-film-strength additives that create a protective cushion, effectively dampening gear vibration and preventing metal-on-metal galling. This results in a silent, buttery-smooth retrieve and prevents the brass components from wearing down during heavy use.

Phase 4: Levelwind and Idler System Service (Kinetic)

Because the levelwind on the 0802 is synchronized, the line guide moves during the cast. Any mechanical resistance in this system will act as a brake on your lure’s flight.

• Worm Shaft (Levelwind): Apply Deuthlon Reel Oil to the grooves of the worm shaft. Oil provides a much faster, slicker surface than grease, allowing the line guide to oscillate across the frame with minimal parasitic drag.

• Idler Gears: These gears link the spool's rotation to the levelwind mechanism. Apply Deuthlon Reel Oil to the idler gears and their mounting posts. Using oil here instead of grease significantly lowers the rotational inertia, allowing the spool to reach peak RPMs much faster when the thumb bar is released.

Phase 5: Spool Bearings and Final Reassembly

The spool bearings are the heart of your casting performance and must be kept in pristine condition.

1. Bearing Care: Apply exactly one drop of Deuthlon Reel Oil to each cleaned spool bearing. Its "Dust-Free" technology helps repel fine particles, ensuring your bearings stay fast and quiet.

2. Reassembly: Slide the spool back into the frame. Align the side plate assembly and secure the thumb screws.

3. Validation: Engage the free-spool and verify that the levelwind travels fluidly. The combination of Deuthlon Reel Grease on the drive gears and Deuthlon Reel Oil on the levelwind components ensures your 5600CB operates with professional-grade fluidity.

Technical Summary for the 5600CB (0802)