Ambassadeur 5600Cb (08-01)

Technical Maintenance Protocol: Abu Garcia Ambassadeur 5600CB (08-01)

The Abu Garcia Ambassadeur 5600CB (08-01) is a precision right-hand drive round reel featuring the specialized "Self-Braking System." This 08-01 revision is a classic example of Swedish engineering, utilizing a synchronized levelwind and a centrifugal braking hub that requires high-purity lubrication to remain effective. Because this model is designed to assist with casting control mechanically, any internal "sludge" or heavy grease in the wrong places will negate its performance benefits.

To restore this reel to its peak mechanical state, we recommend a precision service using Deuthlon Reel Grease and Deuthlon Reel Oil.

Step 1: Disassembly and Internal Evaluation

Unscrew the three knurled thumb screws on the right side plate. Remove the plate assembly to expose the drive bridge and the main gear stack. Extract the spool and inspect the centrifugal brake hub. For the 08-01 model, ensure the brake weights are clean and the drum surface is free of oil film, which can cause inconsistent braking and backlashes.

Step 2: Thorough Cleaning and Degreasing

To ensure that modern synthetic lubricants bond at a molecular level, you must remove all traces of factory residue and environmental grit.

• Drive Train: Submerge the brass main gear and the pinion gear in a high-quality solvent. Use a soft brush to clear every tooth of the gear set.

• Levelwind Assembly: Thoroughly degrease the worm shaft and the idler gear posts. These areas are prone to collecting dust, which can create a grinding paste that damages the levelwind pawl over time.

Step 3: High-Torque Gear Lubrication

The 5600CB depends on its gear set to provide cranking power under load. These contact points require a lubricant that can handle high rotational pressure without being displaced.

• Main and Pinion Gears: Apply a thin, consistent coating of Deuthlon Reel Grease to the teeth of the main gear and the pinion gear. This grease is formulated with high-film-strength additives that create a protective cushion, effectively dampening gear vibration and preventing metal-on-metal galling. This results in a silent, buttery-smooth retrieve and prevents the brass components from wearing down during heavy use.

Step 4: Levelwind and Idler System Service (Kinetic)

Because the levelwind on the 5600CB is synchronized, the line guide moves during the cast. Any mechanical resistance in this system will act as a brake on your lure’s flight.

• Worm Shaft (Levelwind): Apply Deuthlon Reel Oil to the grooves of the worm shaft. Oil provides a much faster, slicker surface than grease, allowing the line guide to oscillate across the frame with minimal parasitic drag.

• Idler Gears: These gears link the spool's rotation to the levelwind mechanism. Apply Deuthlon Reel Oil to the idler gears and their mounting posts. Using oil here instead of grease significantly lowers the rotational inertia, allowing the spool to reach peak RPMs much faster when the thumb bar is released.

Step 5: Spool Bearings and Final Reassembly

The spool bearings are the engine of your casting performance and must be kept in pristine condition.

1. Bearing Care: Apply exactly one drop of Deuthlon Reel Oil to each cleaned spool bearing. Its "Dust-Free" technology helps repel fine particles, ensuring your bearings stay fast and quiet.

2. Reassembly: Slide the spool back into the frame. Align the side plate assembly and secure the thumb screws.

3. Function Check: Engage the free-spool and verify that the levelwind travels fluidly. The combination of Deuthlon Reel Grease on the drive gears and Deuthlon Reel Oil on the levelwind components ensures your 5600CB operates with professional-grade fluidity.

Technical Performance Summary