Ambassadeur 5600C5 Mag (11-00)

Service Manual: Abu Garcia Ambassadeur 5600C5 Mag (11-00)

The Ambassadeur 5600C5 Mag is a precision-engineered round reel favored by anglers who demand high-speed retrieval and sophisticated backlash control. To keep the 11-00 model version operating at its peak, a meticulous breakdown and a specific lubrication regimen are required.

Step 1: Breakdown and Component Inspection

To begin the repair, remove the three knurled screws on the handle side plate. Carefully pull the side plate assembly away to expose the internal drive train.

• Spool Removal: Lift the spool out of the frame. Inspect the spool shaft and the high-performance bearings.

• Drive Train Access: Remove the handle nut, handle, and star drag to access the main gear shaft. Take care not to lose the small tension washers (Belleville washers) located under the star drag.

• Cleaning: Use a dedicated degreaser to strip old, gummy lubricants from the brass and stainless steel components. For the C5 ceramic bearings, a sonic cleaner or a quick soak in a solvent is recommended to ensure they are completely free of debris.

Step 2: Precision Lubrication with Deuthlon

The secret to the longevity of the 5600C5 Mag lies in using premium synthetics. We recommend Deuthlon Reel Grease and Deuthlon Reel Oil for their ability to withstand saltwater corrosion and high heat.

Where to Apply Deuthlon Reel Grease

The heavy-duty moving parts require the cushion and stay-put properties of grease:

• Main Gear: Apply a light coating to the teeth of the main drive gear. This ensures a silent, powerful crank.

• Pinion Gear: Focus on the teeth and the yoke area. Since the pinion gear facilitates the connection between the handle and the spool, proper greasing prevents "notchy" retrieval.

• Clutch Mechanism: Apply a thin film to the kick lever and release sliders to ensure the thumb bar snaps back crisply every time.

Where to Apply Deuthlon Reel Oil

Lighter components require low-viscosity oil to minimize start-up inertia:

• Levelwind & Worm Shaft: Place two drops of oil on the worm gear. This allows the line guide to travel back and forth with minimal resistance during a cast.

• Idler Gears: These gears link the spool's rotation to the levelwind system. Use oil here to keep the casting cycle fast and fluid.

• Ball Bearings: Apply one drop of oil to the spool bearings. The C5 series thrives on a light oil film rather than heavy grease.

Step 3: Reassembly and Calibration

1. Seat the Spool: Slide the spool back into the frame. Ensure the magnetic braking surface is clean of any stray grease, as the Mag-X system relies on a clean interface for consistent braking.

2. Close the Side Plate: Align the drive shaft and pinion gear. Secure the thumb screws snugly but do not over-tighten.

3. Adjust the Tension: Tighten the mechanical brake knob until the spool has no side-to-side play. Test the magnetic slider to confirm it moves smoothly across its track.

Maintenance Checklist

By following this guide, your Ambassadeur 5600C5 Mag will maintain its legendary casting distance and smooth drag performance for years to come.