Product Description

DAIWA WORM SHIELD (F59-6501 / 6F596501)

Protect the critical level wind mechanism of your electric reel with this genuine Daiwa replacement guard.

The Daiwa F59-6501 Worm Shield (also identified as 6F596501) is the protective cover designed for the level wind assembly on Daiwa's 750-class electric reels. This shield sits directly in front of the worm shaft, preventing line tangles, reducing saltwater intrusion, and protecting the delicate worm gear from impact damage during transport or heavy use.

If your original shield is cracked, missing, or has loose screw mounts, replacing it is vital to keep your level wind system clean and functioning smoothly. This is an Original Equipment Manufacturer (OEM) part.

Product Features

• Part Number: F59-6501

• Alternate Part Number: 6F596501 (8-digit Global Code)

• Part Name: Worm Shield / Level Wind Guard / Worm Cover

• Material: Corrosion-resistant Composite / Plastic

• Function: Encloses the worm shaft to protect against debris and impact.

• Fitment: Specific to the Tanacom 750 and Bull 750 chassis.

Why Replace Your Worm Shield?

The worm shield is the "bumper" for your reel's delicate level wind system. It often absorbs the impact if the reel is dropped or banged against the gunwale. A cracked shield can allow salt spray to directly attack the worm shaft grease, leading to corrosion and seized level winds. Additionally, a broken shield can snag your braided line, causing frays or breaks under tension.

Tech Tip: This part is held in place by side screws. When installing, do not overtighten, as the composite material can crack. Ensure the Level Wind Post is seated correctly behind the shield before securing.

Compatible Models

This part is engineered for the 750-size electric reel frame.

Daiwa Tanacom Series:

• Tanacom 750 (T750)

• Tanacom 750 E

Daiwa Tanacom Bull Series:

• Tanacom Bull 750 (TB750)

• Tanacom Bull 750 Fe

(Note: This part is specific to the reel width. It will likely not fit the wider Tanacom 1000 models. Please check your schematic key number).

Installation & Schematic Verification

To ensure this shield fits your specific reel generation, please verify the part number in your reel's exploded diagram.

• Schematic Reference: You can locate and download the PDF schematic for your Tanacom 750 at www.reelschematic.com.

• Alternate Number Cross-Reference: This part is listed as 6F596501 in many global parts systems.

Note: If you are replacing the shield, it is a good opportunity to clean and re-grease the exposed worm shaft with light reel grease.