Product Description
Fits: Calcutta TE300 TE400 Conquest 300 400 (not for 2015 2018 Calcutta Conquest 300US 400US 300A 400A).
SmoothDrag CarbonTex Drag Washer Kit – Calcutta TE 300 & 400 Series
Restore the flagship performance of your premium round reels with the SmoothDrag CarbonTex Drag Kit, precision-cut specifically for the Shimano Calcutta Conquest TE 300 and 400 series. The "Total Efficiency" (TE) models were the pinnacle of Shimano’s round reel engineering for years; upgrading to CarbonTex washers ensures their drag performance matches the incredible torque and rigidity of their cold-forged frames.
CarbonTex washers provide a massive performance leap over the original factory materials by eliminating "start-up inertia"—that split-second stickiness that can snap light braid or pull hooks when a trophy fish first bolts. This kit ensures your drag remains fluid throughout the most grueling fights, whether you are throwing big swimbaits for Musky or targeting saltwater powerhouses.
Key Performance Benefits
-
Stutter-Free Startup: Virtually eliminates "drag jerk," providing a perfectly fluid line release even under heavy star drag settings.
-
Superior Heat Management: Carbon fiber thrives under extreme friction, resisting the glazing and fading common with older factory washers during long, heavy-load battles.
-
Hydrophobic Stability: Carbon fiber does not absorb moisture or swell, ensuring your drag settings remain consistent in heavy rain, salt spray, or high-humidity environments.
-
Linear Pressure Curve: Provides a predictable and smooth increase in drag pressure as you tighten the star drag, allowing for the fine-tuning required for technical presentations.
Compatibility & Fitment
This kit is a precision-cut, direct-fit upgrade for the internal drag stack of the following classic Shimano TE/Conquest round reels. For exact part orientation and assembly order, please consult the official PDF schematics at www.reelschematic.com.
Fits the following models:
-
Shimano Calcutta Conquest TE 300 / 301
-
Shimano Calcutta Conquest TE 400 / 401
-
Shimano Calcutta Conquest 300 / 301 (Classic Gold JDM/Export)
-
Shimano Calcutta Conquest 400 / 401 (Classic Gold JDM/Export)
Important Note: This kit is designed for the original TE/Conquest series only. It does not fit the newer 2015/2018 "A" or "US" series (e.g., 300A, 400A, 300US, 400US), which utilize a different internal drag diameter and clicker mechanism.
Professional Maintenance & Lubrication
To achieve the legendary "silky" feel of a CarbonTex system and protect the precision gears of your TE series, proper lubrication is essential:
-
Drag Surface Treatment: Apply a very thin, translucent coating of Deuthlon Reel Grease to both sides of each CarbonTex washer. This specialized grease is formulated to withstand extreme pressure while providing a waterproof barrier that prevents "chatter" under heavy load.
-
Mechanical Fluidity: Use Deuthlon Reel Oil on the spool bearings and drive shaft to ensure the reel operates with zero friction, maximizing your casting distance and complementing the upgraded drag system.
