2888411 POTENTIOMETER/3M CONNECTOR KIT

Minn Kota 2888411 POTENTIOMETER/3M CONNECTOR KIT

**Install directions below**

Precise Control, Extended Reach: Optimize Your Trolling Motor's Performance

The Minn Kota 2888411 Potentiometer/3M Connector Kit is an essential replacement part designed to restore and enhance the precise speed control of your Minn Kota trolling motor. This kit provides a reliable, long-lasting solution for worn-out or damaged potentiometers, ensuring smooth and responsive operation on the water. With an integrated 3-meter (approximately 9.8 feet) connector, it offers increased flexibility for installation, particularly in larger boats or when routing cables.

Key Features:

• Restores Precision Speed Control: Replaces faulty potentiometers to bring back accurate and infinitely variable speed adjustments, crucial for effective trolling and boat positioning.

• Durable Construction: Manufactured with high-quality materials to withstand the harsh marine environment, ensuring reliable performance and extended lifespan.

• Genuine Minn Kota Part: Ensures perfect compatibility and optimal performance with specified Minn Kota trolling motor models. Using genuine parts maintains your motor's warranty and original specifications.

• Easy Installation: Designed for straightforward replacement, allowing you to get back on the water quickly.

Models This Part Fits:

The Minn Kota 2888411 Potentiometer/3M Connector Kit is compatible with a wide range of Minn Kota trolling motors, primarily those with wired foot pedals or hand controls that utilize an external potentiometer for speed control. This includes, but is not limited to, many models from the following series:

• Minn Kota Maxxum (Foot Pedal Models)

• Minn Kota Fortrex (Foot Pedal Models)

• Minn Kota Edge (Foot Pedal Models)

• Minn Kota Terrova (Older models with wired foot pedals)

• Minn Kota Traxxis Hand Control Models

• Various other cable steer and hand control models requiring an external potentiometer.

To ensure 100% compatibility, it is highly recommended to cross-reference the part number (2888411) with your trolling motor's owner's manual or the parts diagram specific to your model.

Installation Instructions:

Before you begin:

• Safety First: Always disconnect power to your trolling motor at the battery before performing any maintenance or installation.

• Tools Required: You will typically need a Phillips head screwdriver, a flathead screwdriver (small), wire cutters, wire strippers, and possibly a pair of pliers to crimp the connectors.

• Refer to Your Manual: While these instructions are general, always consult your specific Minn Kota trolling motor's owner's manual for detailed diagrams and any model-specific instructions.

Step-by-Step Installation:

1. Disconnect Power: Locate your trolling motor's battery and disconnect the positive (+) and negative (-) terminals. This is a crucial safety step.

2. Access the Control Head/Foot Pedal:

   • Foot Pedal Models: Depending on your model, you may need to open the foot pedal housing. This usually involves removing several screws from the bottom or sides of the pedal.

   • Hand Control Models: If the potentiometer is located within the hand control, you will need to open the hand control housing.

3. Locate the Old Potentiometer: Identify the existing potentiometer. It will typically have two or three wires connected to it. Note the color and position of each wire before disconnecting. Taking a photo with your phone can be very helpful here.

4. Disconnect the Old Potentiometer: Carefully disconnect the wires from the old potentiometer. If they are soldered, you may need a soldering iron (and desoldering wick) to remove them. Many newer models use spade connectors or small plugs that can be gently pulled off.

5. Remove the Old Potentiometer: Unmount the old potentiometer from its housing. It may be held in place by a nut, screws, or simply friction.

6. Prepare the New Potentiometer:

   • The new 2888411 kit comes with the potentiometer pre-wired with a 3-wire connector.

   • If your original setup had a shorter wire or different connectors, you will need to match the wiring.

7. Connect the New Potentiometer:

   • Match Wiring: Connect the wires from the new potentiometer to the corresponding locations on your trolling motor's circuit board or wiring harness. Refer to your photo and/or wiring diagram.

   • Secure Connections: If the connections are spade connectors, ensure they are firmly pushed on. If you are splicing wires, use appropriate the wire connectors (crimp connectors) to ensure a secure and corrosion-resistant connection.

8. Mount the New Potentiometer: Secure the new potentiometer in the same location as the old one. Ensure it is stable and properly aligned.

9. Route the 3M Connector: Carefully route the 3-wire connector cable. Ensure it is not pinched, kinked, or exposed to excessive abrasion. Use cable ties or clips to secure the cable if necessary, especially if you are utilizing the extended length.

10. Reassemble: Carefully reassemble the control head or foot pedal housing, ensuring all screws are tightened properly.

11. Reconnect Power: Reconnect the positive (+) and negative (-) terminals to your trolling motor battery.

12. Test: Power on your trolling motor and test the speed control. Ensure it operates smoothly through its full range of motion.

Troubleshooting:

• No Power: Double-check all battery connections and ensure the circuit breaker (if applicable) is not tripped.

• No Speed Control: Verify all wiring connections to the potentiometer are secure and correctly matched.

• Intermittent Operation: Check for loose or corroded connections.

By following these instructions, you can successfully install your Minn Kota 2888411 Potentiometer/3M Connector Kit and enjoy precise speed control on your trolling motor once again.