2883460 SEAL-"O"RING KIT

Product Description

Keep Your Minn Kota Trolling Motor Running Smoothly with the Genuine 2883460 Seal & O-Ring Kit

Ensure a watertight seal and prevent costly damage to your trolling motor's lower unit with this essential Minn Kota 2883460 Seal & O-Ring Kit. This comprehensive kit provides all the necessary replacement seals and o-rings to properly service and maintain the lower unit of a wide range of Minn Kota trolling motors, specifically those with a 3-1/4 inch outside diameter lower unit.

Over time, the seals and o-rings in your trolling motor can degrade due to wear and tear, exposure to the elements, and contact with underwater debris. A compromised seal can lead to water intrusion, causing significant damage to the motor's internal components, including the armature and brushes. By proactively replacing these critical parts with a genuine Minn Kota seal kit, you can extend the life of your motor and ensure it operates at peak performance for seasons to come.

This factory original kit contains all the necessary components to completely reseal the lower unit, providing a reliable barrier against water infiltration.

What's in the Kit?

The MINN KOTA 2883460 SEAL-"O"RING KIT includes the following components:

• 1 - 701-039 O-Ring: Essential for sealing the housing of the lower unit.
• 1 - 701-041 O-Ring: Another critical O-ring for ensuring a watertight lower unit.
• 2 - 701-007 Thru Bolt O-Rings: These seals prevent water from seeping in along the thru bolts that hold the lower unit together.
• 1 - 880-003 Prop Shaft Seal: This vital seal protects the motor's internal components from water entry at the propeller shaft.
• 1 - 880-006 Prop Shaft Seal with Shield: An additional seal for the prop shaft, featuring a protective shield for enhanced durability and sealing performance.
   

Is This the Right Kit for Your Motor?

This seal and o-ring kit is designed for Minn Kota trolling motors with a 3-1/4 inch outside diameter lower unit. It is crucial to measure the outside diameter of your motor's lower unit before ordering to ensure proper fitment.

This kit is compatible with a wide array of popular Minn Kota models, typically those in the 28 to 45-pound thrust range manufactured from 1991 to the present.

This kit is known to fit the following Minn Kota trolling motor models:

Endura Models:

• Endura 30
• Endura 34
• Endura 36
• Endura 38
• Endura 40
• Endura 45
• Endura C2 30
   

All Terrain Models:

• All Terrain 30
• All Terrain 33
• All Terrain 36
• All Terrain 40
• All Terrain 42
• All Terrain 44

Edge Models:

• Edge 40
• Edge 45

Maxxum Models:

• Maxxum 33T
• Maxxum 40T

PowerDrive Models:

• PowerDrive 36
• PowerDrive 40
• PowerDrive 42
• PowerDrive 45

Other Compatible Models:

• Classic 28
• 35A
• 35TA
• 40TA
• 65N
• 65W
• 365T
• 30EX
• 40EX

Please Note: This is not an exhaustive list. The primary determinant of compatibility is the 3-1/4 inch outside diameter of the lower unit. If your motor has this dimension and falls within the general thrust range, this kit is likely the correct choice. For verification, it is always recommended to consult your trolling motor's original manual or contact a certified Minn Kota service center with your motor's serial number.

Investing in the MINN KOTA 2883460 SEAL-"O"RING KIT is a small price to pay for the peace of mind that comes with knowing your valuable trolling motor is properly protected from the elements, allowing you to focus on what matters most – a successful day on the water.