1205818 Carbon Drag Kit

Product Description

Fits Pfleuger: Asaro 5925, President 20X 6720 6920 XTS20, President Limited 20, Trion 20 120 4520GX. Fits Shakespeare: AGL825 Agility, DCV1025 Deceiver Summit.

The Finesse Legend Upgrade: Smoothdrag Carbontex Drag Kit (#1205818)

The Pflueger President (20-size) is one of the most popular light-tackle spinning reels ever made. Known for its buttery-smooth retrieve and "jewelry-like" finish, it is the go-to choice for panfish, trout, and finesse bass fishing. However, the factory felt washers in these 20-sized frames are prone to compression and "stiction" (stick-slip). In finesse scenarios using 2lb–6lb test line, that initial jerky hesitation is the primary cause of snapped leaders.

The Smoothdrag #1205818 Carbontex Kit is the essential performance upgrade for these small-frame reels. By replacing the original felt with high-density, cross-weave carbon fiber, you achieve zero start-up inertia. This ensures that the moment a trophy trout or heavy crappie bolts, the drag engages instantly and stays perfectly linear, protecting your ultra-light knots.

Why Upgrade Your Small-Frame Pflueger or Shakespeare?

• Eliminate Light-Line "Shock": Finesse fishing relies on a drag that moves the millisecond a fish surges. Carbontex removes the "grabby" feel common in aged or oily factory felt.

• Superior Heat Management: Even a small 20-sized reel generates significant friction heat during a long run from a Rainbow Trout or Smallmouth. Carbon fiber handles these temperatures far better than felt, preventing drag "fade."

• Freeze & Moisture Resilience: For ice fishermen and early-spring anglers, Carbontex is a must. Unlike felt, it won't absorb water and freeze into a solid block, maintaining a consistent feel in sub-zero temperatures.

• Permanent Performance: Carbontex is virtually wear-proof. Unlike original washers that can become "mushy" or thin with age, this is a "set-and-forget" upgrade for the life of the reel.

Comprehensive Fitment & Compatibility

This kit is precision-lapped to fit the internal spool stacks of the most popular ultralight/light spinning platforms from Pflueger and Shakespeare.

Technical Note: These 20-sized reels utilize a single-washer or small 3-washer stack. Because these are finesse reels, the flatness of your stainless steel drive washers is critical. If they show any "glassy" buildup from old factory grease, polish them with 0000 grade steel wool to ensure 100% surface contact with the new Carbontex.

Professional Installation & Lubrication Protocol

For ultralight spinning reels, a "wet drag" setup is the professional standard for maximum smoothness:

1. Cal’s Universal Drag Grease (Purple): For these small reels, I highly recommend Cal’s Purple (Cold Weather/Finesse) grease. Apply an ultra-thin, translucent coating to both sides of each Carbontex washer. Too much grease can make a light drag feel "sluggish."

2. Metal Washer Restoration: Polish your original stainless steel drive washers until they have a mirror finish. This is the "secret sauce" for a perfectly smooth finesse drag.

3. Spool Bearing Maintenance: While the spool is off, apply a single drop of Deuthlon High-Speed Reel Oil to the main shaft to ensure the oscillation remains silent and effortless.

4. Drag Knob Seal: Ensure the rubber gasket on the drag knob is clean and lightly oiled to keep dust and water out of your new precision drag stack.

SEO & Technical Summary

• Product Type: Premium Carbon Fiber Drag Washer Upgrade

• Brand: Smoothdrag (Carbontex)

• Kit ID: Part #1205818

• Application: Ultralight / Finesse Spinning / Panfish / Trout / Ice Fishing

• Key Benefits: Zero-stiction start-up, moisture resistance, and extreme longevity.