Ambassadeur 5600Ext 15 00

Professional Maintenance and Repair Article: Abu Garcia Ambassadeur 5600Ext (15 00)

The Abu Garcia Ambassadeur 5600Ext (15 00) is a high-performance right-hand drive round reel specifically designed for "Extended" casting capabilities. The 15 00 revision features a refined spool design and a synchronized levelwind system that requires surgical precision during maintenance to preserve its long-distance reputation. Because this model is built with tighter tolerances than standard round reels, using the correct lubricant viscosity is the difference between a record-breaking cast and a mechanical "choke."

To achieve the best possible results, we recommend a complete service using Deuthlon Reel Grease and Deuthlon Reel Oil.

Phase 1: Disassembly and Initial Assessment

Begin by unscrewing the three knurled thumb screws on the right side plate. Remove the assembly to expose the drive train. Extract the spool and inspect the centrifugal brake system. For the 5600Ext, it is vital to check the pinion gear yoke and the bridge assembly for any accumulated grit or old, dried grease that may be hindering the engagement mechanism.

Phase 2: Systematic Cleaning

To ensure that modern synthetic lubricants bond correctly to the metal, all previous residues must be eliminated.

• Internal Gears: Submerge the brass main gear and the pinion gear in a cleaning solvent. Use a soft-bristled brush to clear all debris from the teeth.

• Levelwind Assembly: Thoroughly degrease the worm shaft and the idler gears. Any residual "sludge" in the worm grooves will significantly increase friction during the cast.

Phase 3: High-Torque Gear Lubrication

The "Ext" model relies on its drive train to provide consistent power during the retrieve. This interface experiences significant pressure, which can lead to metal fatigue if not properly cushioned.

• Main and Pinion Gears: Apply a thin, even coat of Deuthlon Reel Grease to the teeth of the main gear and the pinion gear. This grease is formulated to provide an "Extreme Pressure" barrier that prevents metal-on-metal wear. Its unique staying power ensures the gears remain lubricated throughout the season, providing a silent and incredibly smooth cranking experience.

Phase 4: Levelwind and Idler System Optimization

The synchronized levelwind on the 15 00 is a primary area where casting energy is lost. To maintain "Extended" performance, you must minimize the mechanical drag in this system.

• Worm Shaft (Levelwind): Apply Deuthlon Reel Oil to the grooves of the worm shaft. Oil allows the line guide to oscillate at high speeds with almost zero resistance, which is critical for maximizing lure distance.

• Idler Gears: These gears connect the spool's rotation to the levelwind. Apply Deuthlon Reel Oil to the idler gears and their mounting posts. Using oil here instead of grease significantly lowers the rotational inertia, allowing the spool to reach peak RPMs much faster.

Phase 5: Spool Bearings and Reassembly

The spool bearings are the engine of your cast and must be kept in pristine condition.

1. Bearing Care: Apply exactly one drop of Deuthlon Reel Oil to each cleaned spool bearing. Its "Dust-Free" technology helps repel contaminants, keeping the bearings fast and quiet.

2. Reassembly: Slide the spool back into the frame. Align the side plate assembly and secure the thumb screws.

3. Final Tuning: Adjust the mechanical tension knob to eliminate side-play. With Deuthlon Reel Grease on the gears and Deuthlon Reel Oil on the levelwind and idler components, the 5600Ext will operate with professional-grade fluidity.

Technical Summary for the 5600Ext (15 00)