Product Description
Mitchell 81741 Right Outer Ring – Genuine Replacement Part
The Mitchell 81741 Right Outer Ring is a structural and protective trim component designed for the right side plate (handle side) of Mitchell’s legendary 600-series conventional reels. This ring serves a dual purpose: it reinforces the edge of the side plate against impacts and provides the critical mounting surface for the frame screws and posts.
Beyond its structural role, the 81741 ring is essential for the aesthetic "classic" look of the Mitchell 600. Because it is an outer-facing metal part, it is often the first component to show signs of "boat rash," pitting, or corrosion from saltwater exposure. Replacing a damaged or corroded ring is a key step in both mechanical restoration and cosmetic preservation.
Product Specifications & Compatibility
The 81741 Right Outer Ring is engineered with the specific hole patterns required to align with the frame posts of the mid-to-large capacity Mitchell conventional reels.
Compatible Models:
-
Mitchell 600 / 600A (Standard Conventional)
-
Mitchell 602 / 602A
-
Mitchell 600AP / 602AP (High-Performance series)
-
Mitchell 622 (Standard Saltwater)
Technical Note: In the Mitchell 600 architecture, the Right Outer Ring (81741) and the Left Outer Ring (81742) are not interchangeable due to different clearances for the free-spool lever and clicker assemblies. To ensure you are ordering the correct side, please verify the orientation using the schematics at www.reelschematic.com.
Technical Cross-Reference
To assist in sourcing through modern inventory systems or identifying New Old Stock (NOS) parts, please refer to the following alternate part numbers:
-
Alternate Part Number: 1181741
-
Alternate Part Number: 81741-1
Key Features
-
Reinforced Construction: Forged from high-grade alloy to prevent side plate "spreading" or deformation under heavy drag pressure.
-
Corrosion-Resistant Plating: Typically finished with heavy chrome or specialized coatings to withstand the abrasive effects of salt spray and humidity.
-
Precision Hole Alignment: Machined to guarantee that the 81709 side plate screws and frame posts align perfectly, ensuring a square and rigid reel frame.
-
OEM Profile: A direct replacement that maintains the original factory tolerances and the "over-engineered" durability Mitchell is known for.
Maintenance & Lubrication Recommendation
Since the outer ring is the primary interface between the metal frame and the plastic/composite side plate, it is a common site for "crevice corrosion" where saltwater gets trapped. We strongly recommend using Deuthlon products during assembly:
-
Deuthlon Reel Grease: Apply a very thin film of grease to the backside of the 81741 ring where it meets the side plate. Its "Aqua Shield" technology creates a waterproof gasket-like seal that prevents saltwater from seeping behind the ring and causing hidden oxidation.
-
Deuthlon Reel Oil: Use a light wipe of oil on the exterior surface of the ring after cleaning. This helps shed water and protects the chrome finish from pitting in harsh marine environments.
