Product Description

SHIMANO 106A4 CLICK GEAR (TLD0098)

The Voice of Your TLD

The Shimano 106A4 Click Gear (Part No. TLD0098) is the genuine OEM gear responsible for generating the audible alarm on Shimano's legendary TLD lever drag reels. Located on the spool shaft (typically on the non-handle side), this toothed gear interacts with the metal click pawl.

When the clicker switch is engaged, the pawl bounces over the teeth of this gear as the spool turns, creating the loud, rhythmic clicking sound that alerts you to a strike. If your clicker has become silent, faint, or skips beats, the teeth on this gear are likely worn down or stripped.

Product Specifications

• Part Name: Click Gear

• Manufacturer: Shimano

• Part Number (MPN): TLD0098

• Schematic Code: 106A4

• Material: High-Strength Nylon / Plastic (White)

• Installation Position: Spool Shaft Assembly (Left Side)

Compatible Models

This part is the standard click gear for the classic graphite lever drag series that has been a staple in offshore fishing for decades.

• Shimano TLD Lever Drag Series:

  • TLD 15

  • TLD 20

  • TLD 25

• Shimano TLD Star Drag Series:

  • TLD Star 15/30, 20/40 (Check specific schematic; some star drags use a different metal gear system)

Installation & Reference

To ensure this is the correct gear for your reel, please cross-reference the part number TLD0098 or the schematic code 106A4 with your reel's service diagram.

• Schematic Diagrams: For detailed PDF schematics and part location verification, please visit www.reelschematic.com.

• Alternate Part Number: TLD0098

Installation Tip: This gear slides onto the spool shaft and is typically secured by a C-Clip or E-Clip.

1. Direction: Ensure the gear is seated fully against the shoulder of the shaft.

2. Inspection: While you have the reel open, check the Click Pawl (the metal tongue that hits this gear). If the pawl is bent or the tip is worn flat, a new gear alone won't make the clicker loud again.

3. Lubrication: Do not heavily grease this gear. A heavy grease will dampen the sound. A drop of light oil is all that is needed.