Abu

ABU CLUTCH BEARING F22325* -- SUBS TO ABU 22014

These bearings are now back in stock! Larger discount available for dealers. Replaces F22325* (stamped on your bearing, last number may be a 7 or 1) Size: 10mm ID x 14mm OD x 8mm W Now you can replace or add these hard to find Instant Anti Reverse...

Abu Bearing Drive Shaft

Custom drive shaft with ball bearing in the base portion. This bearing supports the bulk of the load imposed on the drive shaft as the handle is turned under pressure. Outer portion of the drive shaft is supported by an Instant Anti Reverse bearing...

Abu ABEC 7 Ceramic Bearing Upgrade 4x10x4mm. Set of 2

SET OF 2 BEARINGS. ** NOW WITH LOW CONTACT ORANGE SEALS! ** Bearing size is 4 x 10 x 4mm. Si3N4 Ceramic balls. Fits all newer style Abu casting reels with bearing part #13472.  These bearings are incredibly fast. We have spec'd these bearings...

Abu Ceramic ABEC 7 Bearing set of 10 4x10x4mm

SET OF 10 BEARINGS. ** NOW WITH LOW CONTACT ORANGE SEALS! ** Bearing size is 4 x 10 x 4mm. Si3N4 Ceramic balls. Fits all newer style Abu casting reels with bearing part #13472.  These bearings are incredibly fast. We have spec'd these bearings...

ABU 20639 SPEED BUSHING W/ BEARING

If your Ambassadeur reels uses the 20639 centering bushing, you can now add another bearing to it! We have bored out the stock bushing to accept a 4x7x2.5mm bearing in your choice of stainless steel or ceramic hybrid. No need for a spacing washer as we...

Abu S/S ABEC 7 Bearing set of 10 4x10x4mm

SET OF 10 BEARINGS. Bearing size is 4 x 10 x 4mm with stainless steel balls. Fits all newer style Abu casting reels with bearing part #13472. These bearings are incredibly fast. We have spec'd these bearings with both shields intact...if you wanted one...

ABU Worm Bearing for Levelwind 3x7x3mm

This bearing replaces part # 21680 bearing Abec 7 Measures 3x7x3 mm

Abu OLDER STYLE ABEC 7 Ceramic Bearing Upgrade, 3x10x4mm Set of 2

**In stock now*** SET OF 2 BEARINGS. ** NOW WITH LOW CONTACT ORANGE SEALS! ** Bearing size is 3 x 10 x 4mm. Si3N4 Ceramic balls. Fits most older style Abu casting reels with bearing part #5230 or to replace brass bushing #12667. Keep in mind these...

Abu S/S ABEC 7 Bearing Upgrade 4x10x4mm Set of 2

SET OF 2 BEARINGS. Bearing size is 4 x 10 x 4mm with stainless steel balls. Fits all newer style Abu casting reels with bearing part #13472. These bearings are incredibly fast. We have spec'd these bearings with both shields intact...if you wanted...

Abu OLDER STYLE S/S ABEC 7 Bearing set of 10 3x10x4mm

Bearing size is 3 x 10 x 4mm. Stainless steel balls. Fits most older style Abu casting reels with bearing part #5230 or to replace brass bushings. Keep in mind these bearings will replace brass bushing #12667 AFTER approx. 1974 or so (different size)...

Abu 2500C, 2600C ABEC 7 Ceramic Bearing Upgrade 5x11x4mm, 2PC

COMES AS 2PC SET Si3N4 ceramic balls(ultra high grade), stainless steel outer cages. Silicon Nitride is a super hard material ideally suited to bearings. The balls are rounder, harder, and DON'T RUST! Fits all Ambassadeur 2500 & 2600 series...

Abu OLDER STYLE Ceramic ABEC 7 Bearing set of 10 3x10x4mm

**In stock now! ** SET OF 10 BEARINGS. ** NOW WITH LOW CONTACT ORANGE SEALS! ** Bearing size is 3 x 10 x 4mm. Si3N4 Ceramic balls. Fits most older style Abu casting reels with bearing part #5230 or to replace brass bushing #12667. Keep in mind these...