Mike's Reel Repair

Steve A W · Joined: 24 Apr 2011 Posts: 3

Hello
I bought a used MotorGuide bowmount. It says Motorguide 30
5 speed, 12 volt, Stealth.
That is the only info I have on it. Where can I find the model and serial
numbers?
The Speed selector is hard to turn, is this serviceable or does it need to be replaced?
How do I lube the control cables?
I'll probably be back with more questions.
Thanks for any help.
Steve A W

mike · Posted: Wed Apr 27, 2011 11:29 pm Post subject:

Hi Steve

There may be a serial number underneath the foot pedal, under the top cover (bottom side) or inside the top cover. Not sure if I have a schematic for that one though....

You should be able to put a drop of oil around the switch pivot post, not too much as you don't want it inside the switch. If that doesn't work, then change it out.

The cables can be lubed by removing them, hanging then upright and allowing some light oil t follow its way down inside.

Good luck!!

Mike
_________________
"Keep it outta the water damnit!"

www.mikesreelrepair.com